Hydroponics Forums Discussions

Hydroponics Forums Discussions (http://www.hydroponicsonline.com/forums/index.php)
-   Hydroponic Grow Lights (http://www.hydroponicsonline.com/forums/forumdisplay.php?f=3)
-   -   Induction Lights (http://www.hydroponicsonline.com/forums/showthread.php?t=1955)

cable24601 03-27-2011 01:02 AM

Induction Lights
 
3 Attachment(s)
Its time to begin expanding to more hydroponics systems and in doing so I need to add more lighting. I spent quite some time looking in to possible solutions. I really like the idea of the low power consumption of LED but the high cost would keep me from expanding at the pace that I want. I was almost ready to buy a T5 HO setup and then I saw something called induction lights.

There were a few of these on eBay but they were still a bit out of my price range for an unproven technology. Further google serches turned up a $150 50 watt model from Hydroponics Hut and after looking at the specs I was sold. At the $150 price point would allow me to buy 2 lights but after one last web search I found a source that sold just the bulbs at a third of the cost. For only $59.99 each InductionLamps.com: Your source for all Induction Lamps and Fixtures offer the same light excluding the plug and hood. I already had a socket and hood curtsy of some old photography equipment. I ended up ordering 3 lights. These are said to be equivalent to a 90 watt LED ufo or 200 watt HID.

I will have them in a test grow soon but until the here are some pictures.

hydrophotobio 03-28-2011 11:00 AM

Quote:

Originally Posted by cable24601 (Post 6868)
Its time to begin expanding to more hydroponics systems and in doing so I need to add more lighting. I spent quite some time looking in to possible solutions. I really like the idea of the low power consumption of LED but the high cost would keep me from expanding at the pace that I want. I was almost ready to buy a T5 HO setup and then I saw something called induction lights.

There were a few of these on eBay but they were still a bit out of my price range for an unproven technology. Further google serches turned up a $150 50 watt model from Hydroponics Hut and after looking at the specs I was sold. At the $150 price point would allow me to buy 2 lights but after one last web search I found a source that sold just the bulbs at a third of the cost. For only $59.99 each InductionLamps.com: Your source for all Induction Lamps and Fixtures offer the same light excluding the plug and hood. I already had a socket and hood curtsy of some old photography equipment. I ended up ordering 3 lights. These are said to be equivalent to a 90 watt LED ufo or 200 watt HID.

I will have them in a test grow soon but until the here are some pictures.

I have a couple of those as well. One regular, one with a specialized phosphor blend. Both manufactured by Anko Solara.

Sadly, it cannot come close to the photon flux output of LED, even after warming up. I've got a LARGE 200w induction lamp, you can't get near 2,000 umol even one inch away from the light.

This induction tech has been around for ages. There's a reason it's been pretty much relegated to industrial lighting, and that's due to the photon flux output.

Maybe in the future, induction will be quite usable. But with that overly-large tube, no means of refocusing EMR back to the tube, and without a proper reflector, the induction lamp isn't going to do very much.

Lettuce, Spinach, sure it'll work. Not enough output for really good tomatoes or peppers. My research shed in the UK uses induction for human lighting, nothing else. We've got everything from M-land to e-bay discounted induction lamps, the only ones in use are the ones that let us see normally. The M-land sits 100% unusued, still hanging where we originally placed it for an initial test.

hydrophotobio 04-21-2011 08:45 PM

(deleted by hydrophotobio)

jeckysmith 05-27-2011 12:14 AM

What is induction light. Please update me with complete information.

cable24601 05-27-2011 02:08 PM

Quote:

Originally Posted by jeckysmith (Post 7256)
What is induction light. Please update me with complete information.

Magnetic induction lamps are basically fluorescent lamps with electromagnets wrapped around a part of the tube, or inserted inside the lamp. In external inductor lamps, high frequency energy, from the electronic ballast, is sent through wires, which are wrapped in a coil around the ferrite inductor, creating a powerful magnet.

The induction coil produces a very strong magnetic field which travels through the glass and excites the mercury atoms in the interior which are provided by a pellet of amalgam (a solid form of mercury). The mercury atoms emit UV light and, just as in a fluorescent tube, the UV light is up-converted to visible light by the phosphor coating on the inside of the tube. The system can be considered as a type of transformer where the inductor is the primary coil while the mercury atoms within the envelope/tube form a single-turn secondary coil.

In a variation of this technology, a light bulb shaped glass lamp, which has a test-tube like re-entrant central cavity, is coated with phosphors on the interior, filled with inert gas and a pellet of mercury amalgam. The induction coil is wound around a ferrite shaft which is inserted into the central test-tube like cavity. The inductor is excited by high frequency energy provided by an external electronic ballast causing a magnetic field to penetrate the glass and excite the mercury atoms, which emit UV light, that is converted to visible light by the phosphor coating.

The external inductor lamps have the advantage that the heat generated by the induction coil assemblies is external to the tube and can be easily dissipated by convention into the air, or conduction into the fixture. The external inductor design lends itself to higher power output lamps which can be rectangular or doughnut shaped. In the internal inductor lamps, the heat generated by the induction coil is emitted inside the lamp body and must cool by conduction to a heat-sink at the lamp base, and by radiation through the glass walls. The internal inductor lamps tend to have a shorter lifespan than the external inductor types due to higher internal operating temperatures. The internal inductor type looks more like a conventional light bulb than the external inductor type lamps which may be more appealing in some applications.

As with conventional fluorescent lamps, varying the composition of the phosphors coated onto the inside of induction lamps, allows for models with different colour temperatures. The most common colour temperatures of induction lamps are 3500K, 4100K, 5000K and 6500K.

Induction lamps require a correctly matched electronic ballast for proper operation. The ballast takes the incoming mains AC voltage [or DC voltage in the case of 12V and 24V ballasts] and rectifies it to DC. Solid state circuitry then converts this DC current to a very high frequency which is between 2.65 and 13.6 MHz depending on lamp design.

This high frequency is fed to the coil wrapped around the ferrite core of the external or internal inductor. The high frequency creates a strong magnet field in the inductor which couples the energy through the glass walls of the lamp and into the mercury atoms inside the tube.

The ballasts contain control circuitry which regulates the frequency and current to the induction coil to insure stable operation of the lamp. In addition, the ballasts have a circuit which produces a large “start pulse” to initially ionize the mercury atoms and thereby start the lamp. The induction lamps do not start at 100% output - they start at between 75% and 80% output. It takes between 60 and 120 seconds for the mercury bearing amalgam in the lamp to heat up and release enough mercury atoms for the lamps to reach 100% light output.

The close regulation of the lamp by the ballast, and the use of microprocessor controlled circuits allows the ballasts to operate at around 98% efficiency. Only around 2% of the energy is wasted in the induction lamp ballast compared to the 10-15% wasted in traditional “core and coil” type designs used with most high output commercial and industrial lighting.

directlight 12-26-2011 03:15 AM

Induction lighting is fluorescent lighting, instead of an arc being produced inside the lamp to excite the gas, the gas is excited externally with a large coil. Electrodeless lamp - Wikipedia, the free encyclopedia

there are no Induction lamps (afaik) that are made to equal the light output of say a 1000w metal halide lamp, but you can get a 200 watt fluorescent (induction). They are large compare to a 250 / 400 watt metal halide lamp, so they are more difficult to retrofit.

It is best to use a fixture designed for the induction lamp with the proper reflector etc.

yao847zi 03-06-2013 01:15 AM

anyone tried this induction lamp


All times are GMT -4. The time now is 06:43 AM.

Powered by vBulletin® Version 3.8.9
Copyright ©2000 - 2024, vBulletin Solutions, Inc.