Quote:
Originally Posted by GpsFrontier
Any angle fitting I would need to cut anyway because I don't want it to extend inside the tube.
|
This is probably the disconnect I was having. I was going under the impression that the smaller tube would fit "through" a cut made into the larger tube rather than it simply being glued or secured in some other fashion to the outside of the larger vertical tube.
Quote:
Originally Posted by GpsFrontier
I would not need to alter the inside edge of the hole in the main tube at all because it wont be going inside but simply be glued to the outside.
|
Yep...indeed where the disconnect was. I see what you are talking about now.
Quote:
Originally Posted by GpsFrontier
I think you mean more like push it in the right direction because P.V.C. does not bend unless heated just right.
|
No, what I actually meant was just the natural "bend" that would be in a 45 degree type fitting (i.e. the 45 degree angle itself).
Of course....had I read your description a little closer I'd have gotten a better understanding in the first place :P. I got side tracked by all the pretty pictures and kind of skipped over bits of the rest...hehe.