View Single Post
  #103  
Old 08-27-2011, 09:56 PM
T'Mater T'Mater is offline
Senior Member
 
Join Date: May 2011
Location: Nixa,Mo
Posts: 159
Default

well i took one of the plant's in there 6x6 and pulled it up. That's how i PH tested the water. And while i was in there i was looking for any salt build up and wasn't seeing anything close to that.

When i flushed i was great about ending the flush and making sure the PH and EC/PPM was equaled with the water in the tank to the water coming out of the drain before i would stop flushing in hopes i was getting as much junk out of the container's.

BUT what i wasn't doing was after i would start a new tank i wasn't circulating the system near long enough(not thinking about the little holding) to get the PH and EC/PPM equaled....live and learn that's for sure.


How funny that i would remember the holding area's in the Bato bucket's when flushing but not when i would add the new nutes and adjusting the PH.
Reply With Quote