Hydroponics Online Home Home Store Blog Forums FAQs Lesson Plans Pictures

Go Back   Hydroponics Forums Discussions > Hydroponics Discussion Forums > Hydroponic Nutrients and Mediums

precipitation problem


Reply
 
Thread Tools Display Modes
  #1  
Old 07-26-2014, 01:59 PM
quailranchere quailranchere is offline
Junior Member
 
Join Date: Jul 2014
Posts: 1
Default precipitation problem

I set up a deep water system (with bubblers) for a friend. Nine tubs with a total capacity of 150 gallons. I used MaxiGro 10-5-14 to get started while waiting for my order of a two part nutrient package from American Hydroponics to arrive. The amount of dry nutrient was at the low end of the recommended quantity.

The MaxGro resulted in a ppm of slightly over 900 in all tubs. This is with water that has a ppm of 231-287 and a ph of 7.2. The pH of the solution ranges from 5.87 to 6.12. Solution temperature reaches 80 degrees F (it's hotter than hell here), and this is an outdoor installation under shade cloth. The crop is strawberries, so the pH is correct.

But now, four days later, the solution ppm has dropped to 108 to 130 in five tubs. I can see the precipitate on the bottom of the tubs. The pH remains unchanged.

Strangely, the ppm in the remaining four tubs remains at around 900. Same water, same amount of nutrients. No sign of precipitate. I'm having trouble wrapping my head around this. I'm also wondering if this is just a problem with the MaxGro. I've never had any problem with water soluble fertilizer for soil.


Reply With Quote
Reply

Bookmarks

Thread Tools
Display Modes

Posting Rules
You may not post new threads
You may not post replies
You may not post attachments
You may not edit your posts

BB code is On
Smilies are On
[IMG] code is On
HTML code is Off

Forum Jump


All times are GMT -4. The time now is 04:57 AM.


Powered by vBulletin® Version 3.8.9
Copyright ©2000 - 2017, vBulletin Solutions, Inc.