Hydroponics Online Home Home Store Blog Forums FAQs Lesson Plans Pictures

Go Back   Hydroponics Forums Discussions > Hydroponics Discussion Forums > Hydroponic Nutrients and Mediums

Confused Rookie (cF, EC, ppm)?


Reply
 
Thread Tools Display Modes
  #1  
Old 02-15-2012, 10:11 AM
Swainer Swainer is offline
Junior Member
 
Join Date: Feb 2012
Location: Connecticut
Posts: 11
Default Confused Rookie (cF, EC, ppm)?

I've been trying to wrap my head around the whole nutrient world and just when I understand the concept I find endless arguments over whether cF, EC, or ppm should be used. Can anyone tell me what the fundamental differences are and how that applys to nutrient loads? ppm seems straight forward, but EC and cF are still a bit of a mystery...

Reply With Quote
  #2  
Old 02-25-2012, 02:24 AM
GpsFrontier GpsFrontier is offline
Senior Member
 
Join Date: Mar 2009
Location: Lake Havasu AZ.
Posts: 1,855
Default

I saw this post before, but didn't have time to reply to it then, and just plain forgot about it since.


Anyhow fundamentally they all use the same principal to measure the mineral content of the water. It's after that it can be confusing. All EC/cF/TDS/PPM meters start by metering the Electro-Conductivity (EC). From there it depends on the meter how they translate the readings. cF is basically the same exact thing but eliminates the decimal point. See a cF-EC comparison here: Fruit Requirements. TDS (total dissolved solids/salts) and PPM (parts per million) both convert the EC (Electro-Conductivity) into other numbers. Either way they need a conversion rate in order to do that. Most conversion charts/rates are built into the meters memory, but some you can change. Each manufacture and region where the meter was made has a different conversion rate, so comparing readings without knowing the conversion rate is unreliable. In other words, even though your meter reads 600 PPM, and someone eleses meter reads 600 PPM, the true values will be different unless both meters are using the same conversion rate to convert EC (electro-conductivity) into PPM (parts per million). If you want to use a meter, get a EC meter. There are no conversions to worry about, and not many people use cF meters.


Personally I don't use any EC/TDS/cF/PPM meters at all. Not even a pH meter. Well not a electric/battery operated ph meter. The inexpensive pH drops I use are much more reliable than any meter.
__________________
Website Owner
Home Hydroponic Systems
Reply With Quote
  #3  
Old 02-26-2012, 07:05 PM
Swainer Swainer is offline
Junior Member
 
Join Date: Feb 2012
Location: Connecticut
Posts: 11
Default

Thank you very much!

Reply With Quote
Reply

Bookmarks

Thread Tools
Display Modes

Posting Rules
You may not post new threads
You may not post replies
You may not post attachments
You may not edit your posts

BB code is On
Smilies are On
[IMG] code is On
HTML code is Off

Forum Jump


All times are GMT -4. The time now is 01:13 PM.


Powered by vBulletin® Version 3.8.9
Copyright ©2000 - 2024, vBulletin Solutions, Inc.