Hydroponics Online Home Home Store Blog Forums FAQs Lesson Plans Pictures

Go Back   Hydroponics Forums Discussions > Hydroponics Discussion Forums > Your Hydroponics Setup

11 bottle connections


Reply
 
Thread Tools Display Modes
  #1  
Old 03-14-2012, 12:36 PM
piperjim piperjim is offline
Junior Member
 
Join Date: Mar 2012
Location: Salt Lake City
Posts: 17
Default 11 bottle connections

I know this has probably been talked to death, but I think I have a pretty good solution for those folks who cannot get the thin wall to stick their bottle caps into.
The answer I came up with is to not even worry about the thinwall that the bottle caps sit in. In fact I don't even use the bottle caps at all. I found that I could use a 1/2 inch pvc flush mount adapter glued into the elbow and then just glue a short piece of 1/2 inch schedule 40 pipe into that. The bottle fits very nice and snug down on this pipe. Everything is schedule 40 and easy to find at the Home Depot. Some aquarium silcone seals it up and that's that!
While snug and watertight it's not so tight that you couldn't break it apart if you needed to replace a cracked bottle.

Reply With Quote
  #2  
Old 03-14-2012, 11:24 PM
fintuckyfarms fintuckyfarms is offline
Senior Member
 
Join Date: Apr 2011
Location: Southeast Washington State - Right on the line of growing zones 6b & 7a
Posts: 347
Default

great idea, thanks for sharing!

Reply With Quote
Reply

Bookmarks

Thread Tools
Display Modes

Posting Rules
You may not post new threads
You may not post replies
You may not post attachments
You may not edit your posts

BB code is On
Smilies are On
[IMG] code is On
HTML code is Off

Forum Jump


All times are GMT -4. The time now is 02:35 PM.


Powered by vBulletin® Version 3.8.9
Copyright ©2000 - 2017, vBulletin Solutions, Inc.