NEW 1-1000MHz 1GHz reflection VSWR bridge bridge bridge RF SWR bridge
DESCRIPTION
The bridge is a measure of the reflection coefficient of the sensor for measuring RF network , the reflected signal that is output from the amplitude phase information as well as the size , with a wide frequency range , high directivity characteristics. The bridge is a simple application can be combined with the RF spectrum analyzer or scanner with tracking source , capable of measuring return loss and reflection of the entire frequency band of the device ; such as combining vector voltmeter or vector voltage measurement device can accurately measure the signal source added vector impedance circuit , complete RF matching circuit testing and debugging . Widely used measure commissioning , RF circuits, and radio, television and communication equipment and other measurement and debugging in antenna.
Amp main parameters:
Frequency range : 1MHz ~ 1GHz
Characteristic impedance : 50Ω
Directional : ≥35dB
Maximum input power : ≤0.2W
Insertion loss : 6.5dB ± 0.5dB ( from the \"input\" end \"measure\" end )
Connector Type: \"input\" side, the output \"side , \" measuring \"side are N Female
Size : 95 × 65 × 32 (L × W × H) mm