NOTE: The glider being sold for 8.99 with no photos except one with the part obscured in a photo with it installed at a distance is nothing more than a piece of coaxial cable inner insulation, which is exactly what many guys, including myself, have used in a pinch to make. The problem is, it has a hole in the top that is just filled with glue AND the material is not made to last when constantly rubbed against a rough metal surface. They will not last. I could sit and make a hundred of those in a couple of hours. They are not a solution.

If you need more than one, send me a note.

The price is for ONE red glider with free shipping within the U.S. For models 601, 620, 621, 622, 630, 701, 1220, 1222, 1224, 1225, 1226, 1228, 1229, 1245, 1246, 1249, 1218, 1219 and more. I have serviced/refurbished dozens of Dual models from the late 60s through the early 80s. They nearly all needed one of these little guys. I have tried several varieties sold in different places, and I\'ve made my own. Some tables are more forgiving than others. Some I think would work with a wad of chewing gum on that pin, (I do not recommend this.) but others are very picky. This red glider is the best I have found. It is made in Germany and wears very well. In the photos, I have included one of these new ones between two original gliders that were factory installed. This is to show examples of the original parts...shape and size. ONLY THE RED is for sale. The red one is slightly longer, but I have never had an issue with that, and it could easily be trimmed. It\'s most important feature is the flat top surface that allows for excellent contact with the operating arm. It is also not soft rubber, which is not the correct material for this item. Some sold from China are made of soft rubber, shaped like cones, and the hole is much too large. The price is right, but they do not work. There is also a clear variety sold with a black top. It is close to the quality of the one I am selling, but he charges 18 usd each, and they are just two pieces of plastic glued together. I priced mine to make them available to everyone at a fair price while allowing me to recoup my costs and just a little more. Understand that replacing this item may not solve all problems. There are dozens of adjustments on some of these tables, but this is the single most likely solution to any tone arm auto movement issues.