Poreba Model TPK90A1/2M Very Heavy Duty Engine Lathe

Available for your inspection under power and purchase at our JV Partners Warehouse in Cincinnati, Ohio is this \"ABSOLUTELY EXCELLENT\"PorebaModel TPK 90A1/2M, 36\" / 47\" swing X 94\" cc Removable Gap Geared Head Engine Lathe.We have run this machine through all speeds and feeds and find it to be in Absolutely Excellent Operating and Cosmetic Condition. Further, it is equipped with a very desirable 3 1/2\" Spindle Hole, Inch and Metric Threading. The motor is 10 HP/230V/3PH/60CYC.ThesePoreba Engine LathesareExcellent Engine Lathes Built With a Lot of Quality in Poland

Specifications are as follows:

Machine Specifications:

Swing Over Bed: 36\"
Swing Over Carriage: 24-3/4\"
Swing In Gap: 47-1/4\"
Distance Between Centers: 94\"
Spindle Bore Diameter: 3.74\"
Spindle Nose: A1-11
Spindle Speeds: (21) 9 to 900 RPM
Tailstock Spindle Diameter: 5.1\"
Tailstock Spindle Travel: 11.8\"
Tailstock Center: No. 6 M.T.
Width Of Bedways: 23\"
Maximum Weight Of Workpiece Mounted Between Centers: 13,000 Lbs
Maximum Weight Of Workpiece, Using Steady Rest: 16,500 Lbs. EQUIPPED WITH 15/22 KW Two Speed Main Motor, 230/60/3
Inch/Metric Threading
24\" 3-Jaw Chuck
Steady Rest (Presently Missing Clamp)
Hardened Bed Ways
Four Way Rapid Traverse On Carriage
Load Meter
Spindle Jog Forward/Reverse Buttons
Operation Manual Approximate Weight: 18,500 Lbs. F.O.B. Cincinnati, Ohio ALL SPECIFICATIONS SUBJECT TO VERIFICATION BY PURCHASER

F.O.B. Cincinnati, Ohio 45223ALL SPECIFICATIONS SUBJECT TO VERIFICATION BY PURCHASER

We believe the new owner of this Poreba Heavy Duty

Geared Head Gap Frame Engine Lathe will be very happy with it.

We invite you to check our response and you’ll understand that we properly describe our items. The condition we state an item is in, is the way it will be when we ship it. We will load, free of charge on any truck or trailer. You always buy with confidence at Machine Tools of America. First of all, our descriptions are as accurate as we can possibly make them, and we\'ve been describing equipment for longer than we care to admit. Secondly, we offer our customers a 30 day, freight prepaid, full refund return privilege on everything we sell, unless otherwise specifically stated. If you’re not satisfied that this item is as we represented it to be, send it back to us and we’ll refund what you paid us. Every item we sell, unless otherwise stated, is available for inspection at our Miamisburg, Ohio Warehouse (515 Kercher St., Miamisburg, OH 45342). We request that the successful buyer contact us within 72 hours from commitment to purchase and pays in full for their purchase within 7 days, whether or not they have picked up their machine. We will store your purchase, free of charge, for a reasonable length of time, if time is needed to arrange for shipping. We accept Company Checks, Personal Checks, Bank Checks, Certified Checks, Bank to Bank Wire Transfer, Credit Card, PayPal, or even Cash.

We are:

Machine Tools of America and you can contact us by phone: Bruce at 937-545-8475 or Andy at 937-604-6031. Our fax is 937-866-6668 or 937-866-8514 and the office phone is 937-866-8334, but we’re seldom there.

For ground shipping on flat bed, single drop deck, or double drop deck trailers, we recommend you contact the following: White Brokerage, Inc.; toll free phone number 877-922-4212(ask for Reenie), A&P Freight Services; toll free number 800-628-6419 Ext 225 (ask for Paul), Best Ways Brokerage Inc.; toll free number 800-426-1220 (ask for Mark), Fastway Transport, Inc.; toll free number 800-817-2381 (ask for Chris). All four (4) of these companies are located in northwestern USA and are very adept at organizing partial capacity shipments at favorable prices to anywhere in North America.

Inform them that they will pick up your machine at our JV Partners Warehouse at3290Beekman St., Cincinnati, OH 45223. ThePoreba Engine Lathewill weigh approx. 18,500# and occupy 17’ of bed space. Further, inform them it needs tobe tarped.

---