This item has been shown 22 times.
E3D V6 Hot End Full Kit 1.75mm 12V Bowden/RepRap 3D Printer Extruder Parts Accessories 0.4mm Nozzle
This E3D V6 Hot End Full Kit 1.75mm 12V Bowden/RepRap 3D Printer Extruder Parts Accessories 0.4mm Nozzle DescriptionsWith PTFE in hot regions of our HotEnd we can reach 260C with the supplied thermistor. By swapping a thermistor for a thermocouple (may require additional electronics) you can reach over 280C.
This not only allows you to print extremely high temperature materials like PP/ Polycarbonate and Nylons but also eliminates HotEnd meltdown failures associated . latest v6 hotend has a PTFE liner inside the hotend this liner is never subjected to high temperatures so there is no risk of damaging the liner through overheating.
Our new HeaterBlock gives the fastest heat up times and the most responsive temperature control by clamping around the cartridge for maximum thermal contact. The new thermistor placement means you get the most accurate temperature readings with the fastest response. What this means for you the user is that you can go from 20C to 200C in just 65 seconds, temperature control is responsive enough that you can keep the hotend within 0.5C of your set temperature or less with ease.Reduced Bulk and Z-Height.
We've focused on cutting as much bulk from the V6 as possible. This means an overall length of just 72mm and significant reductions in bulk in the X/Y dimensions by using our new injection moulded fan duct. Package Included:
1 x Metal J-Head hotend 1.75mm / 0.4mm nozzle / 12V 40W Heater / NTC3950 Thermistor
1 x Heatsink shroud with 12V 0.13A High Speed Fan 3010S
1 x One meter long bowden PTFE/teflon tubing 4mm OD 2mm ID
1 x Pneumatic Straight Fitting to connect to extruder cold end
1 x Throat with Teflon Tube and 0.4mm Temperature Peformance.RepRap 3D printer extruder hotend compatible with E3D V6 1.75mm / 0.4mmMetal construction with PTFE liner inside, good for ABS, PLA and other conventional print materials12V 40W heater, 12V high speed fan with shroud, NTC 3950 pre-wired thermistorEasy No-Solder, No-Tape, No-Adhesive assembly and 0.71 x 6.89 x 4.49 inchs., Weight: Our products will be shipped through trusted shipping services such as, USPS, UPS, FedEx, LaserShip, ParcelPool and Prestrige. It?s our sole discretion on which service to use for your shipment.
- We only ship to the lower 48 states only, with no APO/FPO addresses or PO Boxes allowed. Local pickups and combined shipping options are not provided at this time.
- We usually ship within 1-2 business days after receiving cleared payment via PayPal only, and it would take 1-6 business days for the shipment to arrive at your destination
responseIf you are not 100% satisfied with your purchase, you can return the product and get a full refund You can return a product for up to 30 days from the date you purchased it. Any product you return must be in the same condition you received it and in the original packaging. Please keep the receipt.Thank you. We greatly value your trust and confidence and sincerely appreciate your loyalty to our business