This item has been shown 0 times.
Amvent Pro-50X 50 Amp Plasma Cutter
Plasma Cutting Defined
Digital Inverter Plasma Systems
Plasma Cutting vs Oxy-Fuel Torch
Frequently Asked Questions
Included in Each Package
Terms and Conditions of Sale / Warranty
Plasma Cutting Defined
Plasma cutting is a process that is used to cut all metals of different thickness using a plasma torch. In this process, compressed air is blown at high speed out of a nozzle. At the same time an electrical arc is formed through that gas from the nozzle of the torch to the surface that is being cut, turning some of that gas to plasma. The plasma is sufficiently hot to melt the metal being cut and moves sufficiently fast to blow molten metal away from the cutting surface.
Digital Inverter Plasma Systems
Amvent Pro-50X utilizes latest generation, state-of-the-art plasma cutting machine. It packs a huge amount of power and performance in a small, compact and highly portable package. Inverter plasma cutters, in contrast to the outdated analog models, rectify the mains supply from AC to DC, which is fed into a series of high-frequency Metal Oxide Semiconductor Field Effect Transistors (MOSFETS). The use MOSFET technology allows for the reduction of the size and weight of the plasma cutter, while increasing the precision and efficiency. Amvent Pro-50X uses the most advanced MOSFET series manufactured by TOSHIBA.
Plasma Cutting vs Oxy-Fuel Torch
AmVent Pro-50X is an inverter air plasma cutter. Plasma cutting provides countless advantages over Oxyfuel. It cuts faster; does not require a pre-heat cycle; produces a small and more precise kerf width (the width of the cut); and has a smaller heat-affected zone, which prevents the surrounding area from warping or damaging the paint (this is highly useful when performing body work). A plasma cutter also cuts any type of conductive metal (Oxyfuel cannot cut stainless steel or aluminum). Plasma cutting is a cleaner, safer, less expensive and more convenient method of metal cutting because clean, dry air is used for most plasma cutting applications.
Summary of Advantages of Plasma Cutting:
- Cuts any conductive metal (OxyFuel cannot cut stainless steel or aluminum)
- Faster, cleaner, less expensive, more convenient
- Smaller, more precise, thinner kerf width (the width of the cut)
- Less slap to clean
- Cheaper (no gas or tank required)
- No preheating of metal needed prior to cutting
- No gas pressure setting or flame tuning needed
- Smaller heat-effected zone
- No warping or paint damage (Great for auto body-work)
- No purchase of expensive gas required
- Highly portable
Dual Voltage (Automatic) 110/220V 50/60 Hz
Large Cooling Fan
Inverter PWM High Frequency Technology
Integrated Large Front Panel Digital Display
Compact and Light Weight
Integrated Front Panel Pressure Gauge
Frequently Asked Questions
How does the quality of this tool compare to other major brands such as Hobart, Ramsond or Lincoln?
This tool is very durable and the quality is in fact comparable to more famous brands at a fraction of their price.
Where can I buy consumables for this machine?
The Pro-X takes standard consumables and that are readily available on .
How reliable and durable is this machine?
Amvent employs one of the most rigorous quality control standards in the world. Each machine is subjected to a rigorous quality control protocol at the time of manufacturing. Also, prior to shipping to the customer, each unit is put through a 30 point test and inspection. This machine is highly durable. With over 5000 units sold, the AmVent PRO-50X is one of the most reliable and durable portable plasma cutters in the market.
If I buy this tool, how quickly will I receive it?
We ship within 1-2 business days of receiving payment. Usually however, we ship the next business day. You should receive it, in the lower 48 States, within 3-5 day of shipment. However, we cannot guarantee transit time.
How do you ship this item?
We usually ship by UPS Ground.
Will I receive a tracking number?
Yes. You will receive a tracking by email as soon as the item is shipped. If you don't receive your tracking number, you can check the status of your order in the ORDER DETAILS section of the WON items on your page.
What's your return policy?
We do not accept returns on this item.
How does the warranty work on this item?
If within the warranty period, your machine fails for any reason, return it to us and we will repair or replace it at no cost to you. We have service technicians who are trained and qualified to service these tools.
Does this machine have a plug attached to it?
No. There is no plug attached to the cable as the unit can be used for both 110V and 220V
Do I need to switch between 110V and 220V?
No. This plasma cutter is equipped with an automatic detection module. It automatically detects the voltage.
What type of air is required for this plasma cutter?
You need compressed air to operate this plasma cutter. Any standard size compressor can be used to provide the necessary compressed air for this machine
Included in Each Package
Each Amvent Pro-50X Plasma Cutter comes as a complete package. It includes the following items:
(Place mouse over items below to see larger image)
Amvent Pro-50X Plasma Cutter Machine
Rear Mounted Air Regulator/Filter
Heavy Duty Plasma Torch (10 Ft Cable)
Plasma Consumables Kit
Ground Clamp (7 Feet Cable)
Connectors and Teflon Tape
Do you have questions about this product? How about technical support, parts or service? Need consumables or parts? We have the answers that you need. You can email or call us and one of our knowledgeable and certified technical agents will be ready to assist you with all of your questions. You may call us at (248) 363-7834 during normal business hours.
Terms, Conditions & Warranty
By viewing this listing or offerding on, purchasing, or offering to purchase the product stated herein, you certify that you are at least 18 years of age and have fully read, understand and agree to be bound by all of the terms and conditions stated herein.
Unless otherwise clearly stated, all items are BRAND NEW and available IN STOCK and normally ship within 1-2 business days of receipt of payment.All payments must be received within 3 calendar days of close of sale or purchase date. All payments made by personal/business orelectronic check require bank clearance prior to shipment. WE ACCEPT PAYAL AND ALL MAJOR CREDIT CARDS. TO PROCESS PAYMENTS BY CREDIT CARD, PLEASE CONTACT US AT DURING NORMAL BUSINESS HOURS AT (248) 363-8302.
Automated response Policy
We recognize the importance of responses in community and as such we use an automated response software provided by . Our integrated software automatically (within 30 seconds) leaves a positive response for all paying purchasers who leave positive response for us.
We CANNOT, under any circumstance, accommodate local pickups or third party shipping arrangements.We ship to physical address only. We DO NOT ship to P.O. Box, APO or FPO.We DO NOT offer combined shipping due to restrictions. Flat rate shipping rates, if offered, only apply to the 48 contiguous States.They do not apply to Hawaii, Alaska and Puerto Rico or other US territories.Please contact us for rates to those locations.Shipping method shall be ground shipping by the carrier of our choice (usually UPS, FEDEX or US Postal Service). We cannot accommodate the carrier of purchaser's choice. All items will be shipped to the purchaser's address as entered onto PayPal and/or . We are not responsible for errors or inconsistencies in said addresses. Please update your address before you purchase. All items are shipped Free on Board (FOB) at our warehouse, freight prepaid.The customer takes title to the goods at the time of shipment. WE ARE NOT RESPONSIBLE FOR TRANSIT DELAYS.
For shipments to locations outside the United States the purchaser shall be responsible for custom clearance, duties, brokerage fees, taxes and other incidental charges. It is the responsibility of the purchaser to determine whether each product is suitable for import and use into their jurisdiction. For export documentation purposes, we CANNOT accommodate requests to declare the purchased item as "gift" or "sample" or undervalue the purchase amount as they are in contravention of US and Canadian law.
Please note that we receive constant complaints about the duties and brokerage fees charged by UPS to our Canadian and other international customers. Unfortunately, we do not control these charges. Canadian and other international customers often request shipment by US Postal Service. However we CANNOT accommodate this request due to the high rate of loss/damage we have experienced with US POSTAL SERVICE.
Shipping insurance is INCLUDED .
Inspection Upon Receipt
Upon receipt of the order, the purchaser/recipient is hereby requested to open the packaging and inspect the shipment thoroughly and completely for damage. All visible damage and/or nonconformity, regardless of its severity, size or significance must be noted on waybill or other shipping documents by the customer. Failure by the purchaser/recipient to note any damage, defect or irregularity in the shipping documents shall be construed as a declaration by the purchaser/recipient that the goods were received in good order and condition and free from any defect or non-conformity. If there is significant damage resulting from mishandling of goods by the shipping carrier, the customer is hereby asked to refuse the shipment. Additionally, The customer must notify us, in writing, within 48 hours of receipt of damaged, non-conforming product. In the event of shipping loss or damage, it is the sole responsibility of the purchaser to file for an insurance claim and we will offer all necessary assistance to the purchaser for that purpose. Minor cosmetic damages that do not impact the operation or safety of the unit are expressly excluded under the terms of any return, warranty and/or insurance policy.
A 1 year manufacturer's limited warranty is furnished from the date of purchase warranting the product to be free of material defect or workmanship. This limited warranty covers both parts and labor at Amvent's authorized service facility. In the event of product failure or malfunction, the purchaser shall return the defective/faulty product or component/part thereof to our designated repair facility for inspection. The faulty/defective product component/part will then be repaired or replaced (at our option). The repaired/replaced component shall then be returned to the purchaser. The purchaser shall be responsible for all shipping and handling costs of returning (both ways) faulty products or parts to us for replacement or repair. Certain items which are subject to normal wear and tear are specifically excluded from this warranty (e.g. Consumables). We shall not be responsible for faulty installation, operation or maintenance of the product and as such we recommend installation, assembly, repair and maintenance only by certified and qualified professionals. We reserve the right to require proof of same before honoring any parts warranty replacement/repair. Damage resulting from failure to use the product in a manner consistent with our/manufacturer’s recommendations shall render the limited warranty void.This limited warranty specifically excludes any consequential and/or incidental damages.
Although we may provide technical assistance via telephone or email to the customer, it is virtually impossible to troubleshoot all matters via telephone or remote assistance. As such, the offering by us of any technical assistance is made without any warranty or guarantee and provided on “as is” basis. Although we will try to provide technical support remotely (via telephone/email), in many circumstances the technical issue/problem may not be resolved despite our best efforts. As such, the purchaser expressly acknowledges, as an express condition of this sale, that the customer may be required to consult a professional technician for troubleshooting/repair/start-up and that any such consultation, shall be at the sole responsibility of customer and the customer shall bear all costs relative thereto. All such costs shall be the responsibility of the customer and we shall not be responsible for any costs or expenses related thereto.
Suitability and Compliance
It is the responsibility of each purchaser to determine whether any particular product is compliant with and permissible for use pursuant to the applicable rules, codes and/or regulations, if any, and suitable for particular use and operation. We make no representations or warranties whatsoever concerning the suitability of any merchandise for a particular use or purpose. The details, specification and information provided herein are the full and complete information and data available with respect to each product. Do not assume the existence of any fact, data or information that is not expressly stated herein. We only warrant the information contained herein. If you purchase under certain assumptions which are not expressly stated herein, you purchase at your own risk and without recourse to us.
We reserve the right to make slight modifications necessary to the merchandise for product improvement, including cosmetic changes, changes in labeling and color. Colors as viewed on photographs or computer monitors may appear slightly different than the actual color of the product depending on the resolution of your monitor.
All sales are final. Returns are not accepted under any circumstance. To the extent we may be compelled to accept returns, they are subject to a minimum 30% stocking fee. The shipping and handling charges are always non-refundable.
This transaction shall be governed by the laws of the State of Michigan and any dispute arising thereof shall be subject to the exclusive jurisdiction of the Courts of the State of Michigan. By offerding and/or purchasing this item, the purchaser/buyer acknowledges that he/she/it has read and agrees with all of the policies, terms and conditions stated herein. No modifications to the terms contained herein shall be valid unless in writing and signed by our authorized agent. BY VIEWING THIS LISTING YOU ACKNOWLEDGE AND AGREE THAT THIS SITE IS INTENDED FOR VIEWING WITHIN THE UNITED STATES ONLY AND WILL ONLY BE CONSTRUED AND EVALUATED ACCORDING TO UNITED STATES LAW. IF YOU USE THIS SITE FROM OTHER LOCATIONS YOU ARE RESPONSIBLE FOR COMPLIANCE WITH ANY AND ALL APPLICABLE LOCAL LAWS. AMVENT CORPORATION MAKES NO REPRESENTATIONS THAT THE MATERIALS CONTAINED WITHIN THIS SITE ARE APPROPRIATE FOR LOCATIONS OUTSIDE THE UNITED STATES. ANY AND ALL INFORMATION CONTAINED HEREIN, INCLUDING BUT NOT LIMITED TO INFORMATION REGARDING PRODUCTS AND PRODUCT SERVICES, APPLIES ONLY TO THOSE PROVIDED OR OFFERED WITHIN THE UNITED STATES.
By entering this site/viewing this listing, you acknowledge and agree that your use is at your own risk and that none of the parties involved in creating, producing, or delivering this site is liable for any direct, incidental, consequential, indirect, or punitive damages, or any other losses, costs, or expenses or any kind (including legal fees, expert fees, or other disbursements) which may arise, directly or indirectly, through the access to, use of, or browsing of this site or through your downloading of any materials, data, text, images, video or audio from this site, including but not limited to anything caused by any viruses, bugs, human action or inaction or any computer system, phone line, hardware, software or program malfunctions, or any other errors, failures or delays in computer transmissions or network connections.
Although the specifications, features, illustrations, equipment and other information contained in the site are based upon up-to-date information, and while Amvent Corporation makes all reasonable efforts to insure that all material on this site is correct, accuracy cannot be guaranteed and Amvent Corporation makes no warranties or representations as to its accuracy. Certain information and representations contained the specifications, including, without exclusion, maximum speed data is variable and dependant on conditions such as slope, road surface and rider weight. This site, and all information and materials contained herein, is provided to you "AS IS" WITHOUT WARRANTY OF ANY KIND, EITHER EXPRESS OR IMPLIED, INCLUDING, BUT NOT LIMITED TO, THE IMPLIED WARRANTY OF MERCHANTABILITY, FITNESS FOR A PARTICULAR PURPOSE. No modifications to the terms contained herein shall be valid unless in writing and signed by our authorized agent.
Copyright, Trademark, Title and Non-Infringement
By entering and viewing this listing you acknowledge and agree that any name, logo, trademark, or servicemark contained on this site is owned or licensed by Amvent Corporation and may not be used by you without prior written approval. Amvent Corporation is the intellectual property rights owner of all illustrations, photographs, text and data displayed here and no portion thereof, including but not limited to the text, images, audio or video, may be used in any manner, or for any purpose, without Amvent Corporation's express written permission. Modification or use of the material on this site for any other purpose violates Amvent Corporation's legal rights. Amvent Corporation will aggressively enforce its intellectual property rights to the full extent of the law. Sound, graphics, charts, information, or images of places or people are either property of Amvent Corporation or used on this site with permission. Your use of any of these materials is prohibited unless specifically provided for on the site. Any unauthorized use of these materials may subject you to penalties or damages, including but not limited to those related to violation of trademarks, copyrights, privacy, and publicity rights.
Amvent, Pro-50X and its model names, the stylized Amvent and logos, specific product designations, and all other words that are identified as trademarks and/or service marks are, unless noted otherwise, the trademarks and service marks of Amvent Corporation in the U.S. and other countries.