Great Sounding Head

Excellent Proto Trak MX-2 CNC Control w/ \"Z\" Axis Readout

Hard Chromed Ways

Late Model 2 HP Alliant, Knee Type Vertical Milling Machine w/ 9\" X 49\" Table. It HasHard Chromed Ways and a Good Table Surface, andaBijur One Shot Lubrication System. Further, It Is Equipped With a Proto Trak Model MX-2, Two (2) Axes CNC Controller w/ \"Z\" Axis Readout .

The following machine tool is nowavailable for your inspection (under power) and purchaseat our warehouse in Beautiful Downtown Miamisburg, Ohio.A \"Very Good\",Alliant 9\" X 49\", 2 HP, Vertical Knee Type Variable Speed Milling Machine w/ Hard Chromed Ways and Good Table, S/N20418449, New in 2001.Ithas Hard Chromed DovetailWays (Some Wear but in Good Shape. Look at Those Photos.). Equipped with Proto Trak Model MX-2, Two Axes CNC Controller w/ \"Z\" Axis Readout, and aBijur One Shot Lubrication System.It has a good table surface. The head of this Alliant Milling Machine is as quiet as the day it was new. It is vibration free in the entire RPM range, both in direct drive and back gear. Spindle speeds are infinately variable from 60 RPM to 4500 RPM. The spindle nose is R-8 taper. The table size is9\" X 49\". Table Travel is 30\", the Saddle Travel is 12\", and the Power Quill Travel is 5\" plus 16\" ofKnee Travel. Electrical requirement is 220V/440V/3PH/60CYC, presently operating on 220V. It weighs MillElectrics:220/440/3/60Ram travel:12\"Quill travel:5\"Approx weight:2400 lbsSpindle feeds:1.5 to 6 IPRSpindle motor:2 HP/ 1720 RPMSpindle taper:R-8Overall height:82\"Quill diameter:3.375\"Spindle speeds:60 to 4500 RPMCross travel (y):12\"Spindle diameter:1.875\"Table dimensions:9\" x 49\"Dimensions (w x d):66\" X 46\"Vertical travel (z):16\" Knee TravelLongitudinal travel (x):30\"Spindle-head tilt, up/down:35 DegreesSpindle-head swivel, degrees:90 DegreesDescription

Alliant \"Vari-Speed\" Vertical Mill
S/N: 20418449
Specifications:
Table Dimensions: 9\" x 49\"
Longitudinal Travel (X): 30\"
Cross Travel (Y): 12\"
Vertical Travel (Z): 16\" + 5\" Quill Travel
Ram Travel: 12\"
Quill Travel: 5\"
Spindle Taper: R-8
Spindle Diameter: 1.875\"
Quill Diameter: 3 3/8\"
Spindle-Center to Column
Min: 6 3/4\"
Max: 18 3/4\"
Spindle-Head Swivel, Degrees: 90 Degrees
Spindle-Head Tilt, Up/Down: 35 Degrees
Spindle Speeds: 60 to 4500 RPM
Spindle Feeds: 1.5 to 6 IPR
Spindle Motor: 2 HP/ 1720 RPM
Electrics: 220/440/3/60
Equipped With:
2 HP Alliant \"Vari-Speed\" Spindle Motor
Power Down Feed
One Shot Lubrication System
Dimensions (W X D): 66\" x 46\"
Overall Height: 82\"
Approx Weight: 2400 lbs

You can see thisveryfine machine toolunder power at our warehouse in beautiful downtown Miamisburg, Ohio by calling Andy or myself (see phone numbers below) for inspection. This is an Alliant 9\" X 49\",Vertical Knee Type Milling Machine built with quality in Taiwan.Overall, a \"Good Operating, Good Looking\" milling machine with afine head,hard chromedovetailways, good table surface, greatscrews and nuts,Proto Trak Model MX-2, Two (2) Axes CNC Controller w/ \"Z\" Axis Readout, Bijir One Shot Lube, with everythingworking as it should. The appearance speaks for itself (see photo\'s). If you need an real good, late model,2 HP Vertical Knee Type Milling Machine with a Two (2) Axes CNC Capability, don\'t pass up this opportunity.Youwill have no regretsif you buy this machine.Anexcellent, solid, vertical toolroom milling machine with CNC Control, MADE WITH QUALITY IN Taiwan.

Webelieve thenew owner of thisAlliant, 2 HPVertical Knee Type Milling Machine with Proto Trak MX-2 CNC Controller will beveryhappy with it.

We invite you to check our response and you’ll understand that we properly describe our items. The condition we state an item is in, is the way it will be when we ship it. We will load, free of charge on any truck or trailer. Skidding fee, if you require it is $92.50 on this item. A full crate is $439.00. Those are the prices we have to pay. We make no profit off of skidding or crating. If you contract with a flatbed or step deck hauler, neither skidding nor crating is necessary. You always buy with confidence at Machine Tools of America. First of all, our descriptions are as accurate as we can possibly make them, and we\'ve been describing equipment for longer than we care to admit. Secondly, we offer our customers a 30 day, freight prepaid, full refund return privilege on everything we sell, unless otherwise specifically stated. If you’re not satisfied that this item is as we represented it to be, send it back to us and we’ll refund what you paid us. Every item we sell, unless otherwise stated, is available for inspection at our Miamisburg, Ohio Warehouse (515 Kercher St., Miamisburg, OH 45342). We request that the successful buyer contact us within 72 hours from commitment to purchase and pays in full for their purchase within 7 days, whether or not they have picked up their machine. We will store your purchase, free of charge, for a reasonable length of time, if time is needed to arrange for shipping. We accept Company Checks, Personal Checks, Bank Checks, Certified Checks, Bank to Bank Wire Transfer, PayPal, or even Cash.

We are:

Machine Tools of America and you can contact us by phone: Bruce at 937-545-8475 or Andy at 937-604-6031. Our fax is 937-866-6668 or 937-866-8514 and the office phone is 937-866-8334, but we’re seldom there.

For ground shipping on flat bed, single drop deck, or double drop deck trailers, we recommend you contact the following:White Brokerage, Inc.; toll free phone number 877-922-4212 (ask for Reenie), A&P Freight Services; toll free number 800-628-6419 Ext 225 (ask for Paul), Best Ways Brokerage Inc.; toll free number 800-426-1220 (ask for Mark), Fastway Transport, Inc.; toll free number 800-817-2381 (ask for Chris). Allfour (4) of these companies are located in northwestern USA and are very adept at organizing partial capacity shipments at favorable prices to anywhere in North America.

Inform them that they will pick up your machine at Machine Tools of America’s warehouse at 515 Kercher St., Miamisburg, OH 45342. TheAlliant Millwill weigh approx. 2,650# and occupy 5 1/2’ of bed space. Further, inform them that it needs to be tarped.