Transport remote control (AKA local transport control panel) from an Ampex MM-1100 tape machine. This was working many years ago but I no longer have an MM-1100 here to test it with.It is in good condition for its age. Just a few scuffs and the arrow on the FF button is worn off.With a small (but vital) modification it can also be used on an MM-1200. I did one of these conversions a few years ago and if I recall correctly it just involved cutting one wire that goes to ground on the MM-1100 but must not go to ground on the MM-1200. If your machine is an MM-1200 I will be happy to send the schematics from the 1100 so you can verify this yourself.

---