This item has been shown 0 times.
Crankshaft: New Procomp motorsport cast nodular iron. This is a 4.250 stroke (.250 longer stroke then stock) externally balanced crankshaft. You can use your stock 454 balancer and flywheel with this combination.Cranks are full .125 radius on rods and mains, you will need a454 balancer and flywheel for these cranks. These cranks are rated good to 700hp and 7000rpm.
Connecting Rods: Procomp motorsport H beam 6.385 long. These rods are .250 longer then stock. The longer rod produces less friction, makes more power and creates less cylinder wear. These rods are also H beam, these are good to 650hp and 7000rpm. Many of the kits here on that are selling you much cheaper, weaker I beam rods.
Pistons: All stroker kits are supplied withProbe forged racingpistons.Probe forged pistonsare the finestforged racingpistons on the market today,(I know picture shows KB pistons but we do not us or sell them too many issuses!! you get same kit for same price but with Probe pistons). They have a .180 dome and they yield a 10.00:1 compression with 112cc open chamber heads. The domes on these pistons will also work with closed chamber heads as well. Depending on the cc of your head you can expect between 11.00:1 and 12.00:1 with closed chamber heads. If you are running nitrous or a supercharger these Probe Forged pistons are the only way to go and have you engine live with no piston failures!!.
Rings and Bearings: All engine kits come with with King main and rod bearings and Hastings/Enginetech moly rings. These are not standard off the shelf King engine bearings. These are special bearings made by King for us to be used with the increased radius on aftermarket crankshafts. They are comparable to Clevite H series. King bearings have proven to be excellent quality and hold up to even the most severe applications. Their Acular material offers nearly twice the strength of traditional lead/copper bearings. Hastings/Enginetech rings are the highest quality rings on the market today. They offer less drag and cylinder wear then comparable less expensive rings on the market today.
If you are building a big block Chevy for your project there is no road to cheaper horsepower then increasing displacement. We have excellent dyno tested combinations and can furnish you any parts needed to complete your project. Thanks for looking and happy offerding.