Used Coyote C5 Wheel loader. Enclosed heated cab. Hydraulic quick coupler. Comes with bucket and forks.
Engine
Make: Kohler Diesel
Type: KDW1404
Output: 26 hp at 3,600rpm
# of cylinders: 4
Capacity: 91.2 cu.in.
Dry-type air cleaner with electric
warning signal
Undercarriage
Center Pivot Steering, + 12° angular
movement at rear of vehicle.Rigid
axles with planetary reduction gears in wheel hubs. 100% differential lock for front and rearaxles available on request.
Electrical System
Operating Voltage: 12V
Battery: 1 x 12 V,60 Amp/hr
Alternator: 14V
Starter: 1.9 hp / 12V
Operating Data
Standardbucket capacity: .50 cu. yd.
Bucket Width: 4 ft 5 in
Track Width 3’ 6”
Vehicle Width: 4ft 5 in.
Service Weight: 5,500 lbs.
Breakout Force: 5,253 lbs.
Tipping Load, straight: 3,747lbs.
Tipping Load, full turn:3,306 lbs.
Lifting capacity from
groundlevel:, 3,459 lbs.
Transmission
Hydrostatic drive with automotive-type control.2-stage travel motor can be
engaged under load
Output-regulated travel gear pump,
hydraulically controlled, load limit
control. All wheeldrive
Work speed range: 0 –5.0 mph.
Travel speed range: 0 – 13.0mph.
Tires
Low pressure tires 10.0/75 – 15.3 MPT
11.5/80 – 15.3 MPT tires and
special tires available on request.
Loading Equipment
Z-pattern Kinematics for high breakout force, fast dumping,parallel action,
automatic bucket return to dig position.
Bucket position indicator.
Single lever for easy control.
Float position. Canbe locked for
road travel..
Operating Data (Fork)
Lifting capacity from
ground level (straight): 3,459 lbs.
Brakes
1. Wear-free service brake operated by
inchingpedal, acting on all four wheels
viahydrostatic transmission
2. Multi-disc brake running in oilbath.
3. Mechanicalparking brake actuation.
Steering
All hydraulic center-pivot steering.
Front and rear wheels follow the same track. Steering angle 40° to either side.
Turning circle radius 10’ 6” measured from outer bucket edge:
Hydraulic System
Gear type pump with priority valve for loading and steering hydraulics,one lifting cylinder and one tilting cylinder.
Operating pressure: 2,900psi. Working cylinder and third control circuit protected by secondaryvalves. Preferential steering
circuit valve. Pumpcapacity 12.5 gal/min
Standard Equipment
Tilting cab with roll-over protection (ROPS).
Access to cab from both sides.
Front windshield wipers (electric)
Rear-view mirrors on both sides.
Adjustable driver’s seat with safety belt.
Water heating system with heat exchanger and blower,variable control of heat output, recirculated air control, heated windshield
Hydraulic, quick-release system
Special Equipment
Pallet fork
General purpose bucket
Light material bucket
Additional attachments available.
* Specificationssubject to change without notice
.