Please read the condition description carefully, It was briefly tested after being brought up on a variac. All the lights and tuning meters work as they should. The inputs were also tested and seem to be operating as they should. Bass, treble, loudness, aux , phono, loudness allseem to work.There is a problem with the am and fm bleeding into each other and will need repair to work properly. But each one works and tunes in stations with ease. So this unitshould be professionally serviced before being put into regular use. It\'s in great cosmetic condition and willclean up nicely!
It will be double boxed, surrounded in foam to insure safe undamaged delivery to your home or business. It does require some expert packaging experience, proper packaging materials and lots of time to pack it right, so it does get there safely. I think it\'s worth a few extra bucks, most items can\'t be replaced for any price. A note for you global customers: ( I will get it to your door safely and insured.)
I pride myself on extreme over protective packaging. ( Please look at my response! ) I will only ship to the 48 contiguous states or global! I encourage global shipping. Payment is expected in 48 hours of purchase and on the same token it will ship on the next business day. If you need more time, just send a message and we will work something out.
The Fisher TA-600 (1960)
The Fisher Model 600 is a complete stereophonic FM-AM tuner, stereo audio control and dual-channel power amplifier - all in one integrated chassis. Only the speaker need be added to permit the 600 to function as a high-fidelity sound system for the reception of standard FM or AM programs or for FM-AM stereo broadcasts.In addition to playing Fm and AM radio programs, the Model 600 can be used as the stereo control center and stereo amplifier for the reproduction of phonograph records and tapes. Any type of record changer or player, tape deck or tape recorder may be operated with the Model 600 receiver, either monophonically or stereophonically . Provision is also made for plugging a multiplex adaptor into the Model 600 for receiving FM multiplex stereo broadcasts.
The world\'s only Stereo Receiver for the discriminating Audio enthusiast For those who want the convenience of an all-in-one instrument ... versatility at the heart of their hi-fi installation ... as well as the quality of performance and dependability that have typified all FISHER high fidelity products for over twenty-one years - THE FISHER TA-600 is the only possible choice.
Rated Power: 20 watts per channel Frequency Response: 25 to 20.000 cps ±1 dB Dimensions (W x D x H): 17 x 14-1/2 x 4-13/16 inchWeight: 33,5 lbs netto (40 lbs watts of power from dual twenty-watt amplifiers (seventy watts peakpower)
2.Cascode RF stage on FM for extreme sensitivity
3.Bridge-type, low-noise triode mixer on FM
4.Input and output jakcs for MULTIPLEX reception
5.Two MicroRay tuning indicators to help you tune in the weakest signal as casily as the strongest
6.Connections for four, eight and sixteen ohm speakers (rear)
7.Rotalable, ferrite loop antenna for maximum signal power and minimum interference (rear)
8.Two-position bandwidth on AM (a must for stereo)
9.Ten kilocycle whistle filter to eliminate interference from adjacent stations
10.DC filament supply to reduce hum to complete inaudibility
11.Dual bass and treble tone controls
12.Five-position input selector
13.Five-position stereo-monomonophonic switch
14.Dual balance control
15.Master volume control
16.Tape monitor switch
17.High and low frequency filters
18.Loudness contour switch
19.Five input level adjustments (rear)
20.Phase-reversing switch to compensate for any improperly phased tape recordings or speakers (rear)
21.Tape recorder output jacks (rear)
22.Special input jack arrangement to permit using an external FM tuner with the TA-600 for the reception of FM-FM stereo broadcasts (rear)23.Auxiliary AC outlets for plugging in associated equipment
