Rebuilt Ford 460 that I had planned on installing in a Fox Mustang project that never got to completion. The block, crank, and rods are from a 78 Mercury Grand Marquis. Block has been bored and stress honed to 0.030\" over and crank is 0.010\"/0.010\" under. The heads are C8VE earlier high compression heads with new roller rocker tips at the standard ratio. The pistons are new Speed Pro Hypereutectic dished part number SLP-H418CP30 that should provide a compression ratio slightly above 9:1 and run on regular octane gas. The timing set is a double roller from Jegs 555-20452. The rings are Moly part 844-E296K30. The intake is a new Weind Stealth. The Cam and Lifter set is Jegs 200156 with gross lift of 0.503\" intake and exhaust and duration 276 intake and 286 exhaust. Additionally it has the Fox Conversion oil pan and pickup installed as well as an aluminum water pump. I will also include a new HEI GM style billet Distributor, fuel pump, and stock Fordvalve covers. I have receipts for the machine shop services and for most of the parts. I cannot ship this engine and it must be picked up in Noblesville, IN near Indianapolis, NO exceptions. Payment within 24 hours and pickup within 2 weeks unless alternative agreed plan is worked out.

---