Item Description: Hanna Instruments Combo pH, ORP & Thermometer Meter (HI 98121)

You will need to purchase 7.01 pH and 4.01 pH calibration solution for use with his product. Sold seperately.

• Exclusive easy to replace cartridge stainless steel pH and ORP Electrode.
• Renewable cloth junction. If it becomes dirt simply remove and rejuvenate.
• Automatic temperature compensation
• Automatic calibration
• Direct contact temperature probe.

This HI 98121 meter is designed for simultaneous pH and ORP measurements and also reads temperature, which is continuously displayed on the dual level LCD.

An encapsulated external stainless steel sensor, positioned in close proximity to the pH electrode provides fast response. A fiber junction can be easily pulled out and replenished. And when finally spent, the pH electrode cartridge can be quickly replaced with the supplied electrode removal tool, reducing waste and cost.

HI 98121 works with common batteries and when turned on, displays the percentage of remaining battery life. The stability indicator ensures reliable readings.

Ergonomically designed for ease in handling, this meter will float if inadvertently dropped into water.

HI 98121 is supplied with protective cap, electrode removal tool, batteries and instructions.

Specs:

Range mV ±1000 mV Range pH -2.00 to 16.00 pH Range Temperature -5.0 to 60.0°C / 23.0 to 140.0°F Resolution mV 1 mV Resolution pH 0.01 pH Resolution Temperature 0.1°C / 0.1°F Accuracy mV ±2 mV Accuracy pH ±0.05 pH Accuracy Temperature ±0.5°C / ±1°F Calibration mV factory calibrated Calibration pH automatic, at 1 or 2 points with 2 sets of memorized buffers
(pH 4.01 / 7.01 / 10.01 or pH 4.01 / 6.86 / 9.18) Temperature Compensation Automatic for pH readings Electrode HI 73127 replaceable pH electrode (included); fixed ORP sensor Battery Type / Life 4 x 1.5V with BEPS / approx. 250 hours of continuous use;
auto-off after 8 minutes of non-use Environment -5 to 50°C (23 to 122°F); RH max 100% Dimensions 163 x 40 x 26 mm (6.4 x 1.6 x 1.0") Weight

100 g (3.5 oz)

High Quality!

This unit comes with a6 Monthwarranty against manufacturers defects! You can bid with total confidence!

Calibration Fluids and Storage Solutions!

Don't forget to add a few pH Buffers to the order! Keep your pH Meter in tip-top shape by calibrating periodically! This unit needs a 2-point callibration, so the question is: which buffer solutions do I need? For water based samples, use 7 and 10. For unknown samples use 4 and 10. The key is to steer the units calibration towards the ranges of your samples. Testing acids, use 4 and 7. Testing bases (caustic/alkyline) use 7 and 10. Unknown samples 4 and 10.

We carry 500ml bottles and 20ml pouches in 4.00pH, 7.00pH and 10.00pH. COMBINE AND SAVE ON THE SHIPPING!

20ml Pouches = $1.25 each

125ml /4oz Bottle = $4.99 each

500ml Bottle = $10.49 each

4-Liter Jugs = $39.99 each

460ml Bottle of Storage Solution = $19.99 each

We also recomend using a special solution for keeping your pH Meter's electrode in tip-top shape! Check out the Hanna Storage Solution in our eBay Store!

Shipping:

S&H within the USA (and it's territories) is a flat rate of $7.50 via USPS. With this price you can add a few 20ml pH Buffers or another ph Meter at NO CHARGE!

International S&H is $12.00 to Canada and $15.00 to the rest of the world!

If you buy 500ml Bottles of pH Buffer Solution, your S&H will only be an additional $1.50 per bottle (when purchased with the pH Meter). Order as many as you need!

National Industrial Supply
2767 Maricopa Street
Torrance, CA 90503, USA
310.748.6858
310.833.7306 Fax
E-mail: chardowner@yahoo.com

We prefer PayPal!