Description
Description&Preview shipping&policy Description: This is a fully automatic doughnut machine,you just put material into the hopper, set it up and turn it on,the machine will work itself. Automatically molding, auto termperature control, auto frying,auto turning of the donut,auto output.
SPECIFICATIONS：
Product name：Donut machine
Material：Stainless steel
Size：103*40*65 cm
Donut Diameter：3~10 CM
Voltage：110V/220V
Power：3000W
Yield ：500~800 pcs /hour
Certification: CE
Packing size：104*40*47 cm
Application: western food store equipment, cake room equipment, leisure food factory equipment, leisure and fast food equipment, tea restaurant equipment, bakery equipment, beverage shop equipment, others
IMPORTANT SAFEGUARDS：
A.Make sure that your power supply matches with the power that marked on the product. The deviation is under 10%.
B.Before connect the power, please connect the ground wire firstly.
（! This is high power(3 KW) equipment, it is better to connect a Current safety device.）
C.Before obtaining access to terminals. All supply circuits must be disconnected.
D.If the supply cord is damaged or machine shows any signs of damage, it must be replaced and fixed by the manufacturer, its service agent or similarly qualified person in order to avoid a hazard.
E.The electronic and electric parts must not be immersed.
F.DO NOT Handle roughly or drop on hard surfaces.
G.DO NOT Mix with other utensils in the sink when washing.
H.DO NOT Allow to rust. Always wash parts thoroughly. Dry completely and then lubricate with mineral oil or liquid shortening before storing or reinstalling in unit.
I.DO NOT Force the machine if it becomes jammed. Disassemble and remove any obstruction to prevent damage to the plunger.
J.Children being supervised not to play with the appliance.
K.The instruction concerning persons (including children) with reduced physical, sensory or mental capabilities or lack of experience and knowledge is not applicable.
OPERATING INSTRUCTIONS：
1.Install all parts of the machine and clean the machine.
（! Make sure the temperature controller is off before dial the power switch S1.）
2.Connect power including the ground wire. Make sure that the power requirements of the machine do match the power source as specified on the data plate.
3. Have all material prepared and pull oil into fryer tank.
（! Danger of fire exists if no oil or water in the fry tank. DO NOT put on the machine when tank is dry.）
（! Mind the heat oil and don’t get a burn.）
4. Dial S1, machine is on power.L1 is on and machine start to run. And set your frying time according to T2.
5. Rotate T1 to your desire temperature, but do not exceed 220℃.
Heating is beginning and L2 indicator lights.When temperature is to your desire degree, Temperature controller will be off by itself and heating pipe will stop working. L2indicator is off at the same time. When oil’s temperature degree decreases, T1 can connect power automatically and L2 start working again. This will circulate to ensure temperature is within the temperature you set.
6. Dial S2 to test the plunger. If above steps are OK and oil is heated, put the pre-mix dough into the funnel. Dial S2 to have the dough dropped from funnel and to be fried in the oil tank. At the same time, L1&L3 are light.
7. Then you can make your delicious donut.
（! If you want to stop the machine, remember to turn off the temperature controller firstly）
（! Stop using the machine if it is deviant. Check out its malfunction before you use it again.）
CLEANING & STORING：
A.DO cut off the appliance’s power supply and wait it cooling down before cleaning.
B.Do not use strong alkali cleaners such as lye, soda ash, or trisodium phosphate, these will discolor or even corrode the equipment. Wipe the appliance with soft cloth .Never with abrasive products.
C.Store it in a dry place away from corrosive substances.
D.Cleaning the hopper and the plunger:
Package Includes:
1 x Shaping box
1 xRod
1 x Funnel
1 x Fry Main body
1 x Plunger with 3 mold
Preview:
Thank you for your purchase Problems?
You can follow below process to chontact us. There is a time zone difference,but we will do our best to quickly response to your questions:
Shipping
- Handling time :48 hours
- Standard to USA :about 7-14 working days(ePacket)
-Economy to USA:about 20-35 working days(NO tracking under $5)
- Economy Int\'l Shipping:20-35 working days(NO tracking under $20)
-Standard Int\'l Shipping:20-35 working days(With tracking)
-But like Russia,and some South Ameria country maybe need 2-3 weeks more.
Please make sure your address in is correct. we will only follow your address listed in the orders for the shipment. Import duties, taxes and charges are not included in the item price or shipping charges. These charges are the buyer\'s responsibility.
Payments
We accepts Paypal only If you have any questions about the payment,please contact us through message.
Import Duties
In case some duty is due Upon delivery, it is your responsibility to meet that expense and this may cause delays to delivery schedule and you may have to pickup goods at the customs office.
Terms & Conditions
By offerding on this item,the Buyer agrees to all of the terms and conditions as outlined in this listing .please ensure to read and agree to All terms and Conditions before offerding.
All pictures are for illustration purpose only and Colours may vary slightly.
Our store obeys all Rules and Policies.
Returns Policy
To Return an item you must contact us and take photos of your item to clearly show any damage or unusual aspects of it.
Approved returns will be subject to inspection on arrival. Items must be returned in original condition with all original packaging.
All shipping and handing charges are non-refundable
Return delivery costs are the responsibility of the buyer. We will cover the cost if sending replacement/repaired items.
Within 7 days after receiving your products, we offers a no-hassle 7 day exchange/replace only if your items are found to be defective by manufacturer.
