adamfarber Store
ATTENTION:I will ship ANYWHERE in the world, if you are out of the US and you would liketo buy this item or need any information E-mail me for the shipping cost,etc.
VERY LATE model IC-756PROIII (PRO3) in MINT condition in the Original box with the Original manual, microphone, schematics, power cord, and extra plug/fuses. Serial number 3206XXX! Face and cabinet are BEAUTIFUL shape, a Great looking and Great performing radio. Covers HF bands plus 6 meters. 100 watts output (40 watts AM), covers all modes. The ICOM 756 Pro III is the latest member of the venerable \"756\" family that started with the 756, 756 Pro, 756 ProII. This latest version offers some incremental improvements over the previous 756 Pro II: Improved Third Order Intercept point of +30dBm. Real time spectrum scope (with mini-scope). The IC-756 Pro II spectrum scope display occupied the lower half of the screen. The IC-756Pro III provides a selectable mini-scope display mode. This allows simultaneous display of the filter, memory-keyer and other menus along with a half-size spectrum-scope display. 60 Meter 5 MHz Band. Improved 1st filter and BPF for reduced distortion. Preamp changed to a noiseless response type to reduce second order distortion. New ITU Morse \"@\" symbol.The new \"@\" symbol is provided even with the memory keyer enabled. Programmable SSB transmit bandwidth. The IC-756 Pro II provided three selectable TOBW settings: WIDE/MID/NAR. The lower and upper -6dB points of the transmitted audio-frequency response are fixed for each setting. In the IC-756Pro III, it is possible to program each of the three settings individually with the following preset cutoff frequencies: Lower -6dB point: 100, 300 and 500 Hz., Upper -6dB point: 2.5, 2.7 and 2.9 kHz. This permits the operator to configure his own custom WIDE/MID/NAR selections by mixing and matching low and high roll-off points. Clock function displays local time and UTC time with time difference indication. Screen saver function to prolong LCD life and reduce burn-in. Here are some general specifications: Frequency coverage RX: 0.03 - 60.000 MHz *1, *2TX: 1.800 - 1.999 MHz 3.500 - 3.999 MHz5.3305, 5.3465, 5.3665, 5.3715, 5.4035 MHz 7.000 - 7.300 MHz10.100 - 10.150 MHz *214.000 - 14.350 MHz *218.068 - 18.168 MHz *221.000 - 21.450 MHz *224.890 - 24.990 MHz *228.000 - 29.700 MHz *250.000 - 54.000 MHz *2*1=some freq. bands are not guaranteed. *2=Depending on versionMode: USB, LSB, CW, RTTY, AM, FMNumber of memory channels: 101 (99 regular, 2 scan edges)Antenna connector: SO-239x2 and phono [RCA;(50 ohms)]Usable temperature range: -10°C to +50°C; +14°F to +122°FFrequency stability: less than ±0.5 ppm (1 minute after power ON/0°C to +50°C; +32°F to +122°F)Frequency resolution: 1HzPower supply requirement: 13.8 V DC (±15% negative ground)Power consumption: TX max power 23ARX standby 3.0A (typ.)RX max audio 3.5A (typ.)Dimensions (projections not included): 340(W) x 111(H) x 285(D) mm; 13.37(W) x 4.37(H) x 11.22(D) inchesWeight: 9.6 kg; 21.2 lb.ACC 1 connector: 8-pin DIN connectorACC 2 connector: 7-pin DIN connectorCI-V connector: 2-conductor 3.5 (d) mm (1/8\")Display: 5-inch (diagonal) TFT color LCD. Just tested and used and working perfectly but due to age, type of equipment and shipping, sold “as is”. Buyer pays shipping for a very packed double boxed and insured shipment. Buy from me with confidence as I have excellent response. PLEASE NOTE:
a) Florida residents must pay sales taxb) IF you are out of the U.S. PLEASE e-mail me for shipping costs BEFORE YOU BUY!c) IF you have ANY questions PLEASE e-mail me BEFORE you buy it.Thanks
