• Frequency (0.5 MHz - 1000 MHz) :Usable to 1600 MHz*
  
• ± 40 dB gain
• Maximum noise figure 3.7 dB/1600 MHz
  
• P1dB (+15dBm)
• IP3 +30 dBm
  
• Max input (+5 dBm)
  
• Input/ Output impedance (50 Ω)
• Input return loss (S11 ≤ 10 dB)
• Output return loss (S22 ≤ 10 dB)
• Reverse isolation (S12 ≤ -50 dB)
• Supply (12 V @ 100mA)
• Stability K > 1 (0.5 - 1600 MHz)
• Connectors (SMA Female)
• PCB size (Approx 1\" X 3/4\")
• Ideal for use with our wide-band noise source (see other items) for filter tests

Typical Specifications:

FREQ(MHz) GAIN(dB) NF(dB)

10 44.2 3.6
20 44.3 3.4
50 44.7 2.9
100 45.5 2.8
500 44.2 3.0
1000 40.4 3.2
1600 33.7 3.7*

Please note: Connecting this module directly to a wide-band antenna without any suitable bandpass filtering before the amplifier may cause the amplifier to be swamped by high levels of unwanted interference noise signals due to the high amplification factor and wide-band operation. This may drive the amplifier into compression, and mask wanted low-level signals.

Picture is of a stock item for illustration only.
You will receive a similar-looking item.