Thisis a listing for aMasterflex Easy-Load I/P 77601-60 Pump Head W 56C Motor Adapter, 6K233D Motor, Very dirty, but functional. Came out of a solar panel manufacturing plant

What you will get:

• 1 Masterflex Easy-Load I/P 77601-60 Pump Head (Masterflex I/P Easy-Load pump head, PPS housing/SS rotor)
• 1 56C Motor Adapter (17.8 to 1 Speed Reduction)
• 1 Dayton6K233DMagnetic Disk Brake (Sells on Granger for $303.25)
• 1 Dayton 6K975E Motor (sells on Granger for $264.25)

Description:

This is a Masterflex Easy-Load I/P 77601-60 Pump Head W Masterflex 56C Motor Adapter, Dayton6K233D Magnetic Disk Brake, Dayton 6K975E Motor, Very dirty, but functional. Came out of a solar panel manufacturing plant. This is my item8482,8483,8484,8485,8486,8487,8488. 7 units are available. You are buying 1, with the option of buying up to how ever many are left at the time of purchase.

See the many many pictures below. We have powered on each of these motors / pumps and verified that they work.

Specifications for the Dayton 6K233D Motor:

• Model No. 6K975E
• 1725 RPM (With the 56C Motor Adapter, the RPM at the pump head is 96.91 RPM)
• Volts 115/230 (This is set up for 115 Volts, and comes with a power cord witha 115 Volt Plug on it)
• Amps: 5.8/2.9
• SFA: 6.0/3.0
• HZ: 60
• Ph: 1
• INS CL:A
• SF: 1.15
• Max Amb: 40° C
• Encl: TEFC
• Duty: Cont
• Shaft End Bearing: 6209
• Opp Brg: 6209
• MTR Ref: C63GMJ4602ML04C
• LRKVA Code: M
• FR 56C

• Item:General Purpose Motor
• Motor Application: General Application
• Motor Type:Capacitor-Start
• Enclosure: Totally Enclosed Fan-Cooled
• HP: 1/4
• Nameplate: RPM1725
• Frame: 56C
• Voltage: 115/208-230
• Hz: 60
• Phase: 1
• Full Load Amps: 5.1/2.7-2.4
• Number of Speeds: 1
• Mounting: Face
• Thermal Protection: None

• Insulation Class: B
• Service Factor: 1.15
• Frame Material: Steel
• Max. Ambient Temp.: 40 Degrees C
• Rotation: CW/CCW
• Shaft Dia.: 5/8\"
• Shaft Length: 1-7/8\"
• Overall Length: 11-3/16\"
• Shaft Type: Keyed
• RPM Range:1701-1800
• DutyContinuous
• Nominal Efficiency: 56.2%

Specifications for the Dayton Disk Brake:

• Item: Brake
• Type: C- Face Magnetic Disc
• Static Torque (Ft.-Lb.): 3
• Shaft Dia. (In.): 5/8
• Enclosure: Dripproof
• Voltage @ 60 Hz: 115/208-230
• Voltage @ 50 Hz: 110/208-220
• Coil Volts: 115/208-230VAC Or 110/208-220VAC
• Phase: Single
• Max. RPM: 3450
• Max. HP @ 1725 RPM: 1

• Max. HP @ 3450 RPM: 2
• Ambient (C): 40
• Hz: 60/50
• NEMA/IEC Frame: 56C
• Lever Type: Manual
• Mounts On: NEMA C Face Motor or Between Motor and Reducer
• FinishEpoxy: Paint
• Application: For Rapid Stopping and Holding Power Conveyors, Door Openers and General Machine Drives
• Converts: NEMA C-Face Motor to a Brake Motor, NEMA C-Face Gear Reducer to a Brake Gearmotor
• For Use With: Single Phase Motors or When Wired per Instructions
• Agency Compliance: BISSC Certified, Complies with NEMA Definition MG1-1.26.5, USDA Approved, Complies with 3A Dairy Standards

Information and Specs for the pump head:

• Quick, simple tubing changes—tubing replacement and fluid changeover takes only seconds
• Accept multiple tubing sizes for maximum flexibility
• Automatic tubing retention eliminates user adjustments and makes setup easy—offers improved tubing life and improved performance
• Fast tubing changes minimize downtime
• Adjustable occlusion lets you optimize pressure and suction capabilities and tubing life by adjusting the “squeeze” on the tubing.
• Five-screw mounting—ensures pump head is mounted securely to driv
• The Easy-Load pump head combines an over-center cam with automatic tubing retention in a rugged, chemical-resistant housing. This design allows fast, easy tubing changes without removing the pump head from the drive. Built-in tubing guide ensures correct positioning of tubing to maximize performance and pump tubing life. Spring-loaded tubing retainers ensure tubing is secured automatically to promote long tubing life and optimize performance of each tubing size.
• Select from polysulfone (PSF) housing with CRS or SS rotor, or polyphenylene sulfide (PPS) housing with SS rotor. PSF is economical, while PPS offers enhanced chemical resistance. SS rotors feature PTFE-sealed bearings for long life and reduced maintenance; CRS rotors have Buna N shielded bearings.
• Dual-channel hardware allows two pump heads to operate on a single drive—order 77601-96 separately under \"Accessories\".
  With single or multiple channels, tubing can be changed in each channel without removing the EASY-LOAD pump heads from your drive.

Specifications:

Max flow rate (LPM)13.0Max flow rate (GPM)3.5Min flow rate (LPM)0.01Min flow rate (GPM)0.002Accepted tubing I/P 26, I/P 73, I/P 82Max pressure (psi)40Max pressure (bar)2.7Rotor material Stainless steelHousing material PPSOcclusion AdjustableFlow Chart Click to ViewAutomatic tubing retention YesProduct Type Pump HeadBrand MasterflexManufacturer number 77601-60

Documentation:

• Information on the Dayton 6K233D Magnetic Disk Brake
• More information about the pump head on the Cole Parmer Site. This Pump Head sells for $735.

Free shipping in the USA.

If you receive your item and it is not to your 100 Percent Satisfaction, please contact us before leaving response. I strive to make sure every transaction is a positive one!

I wanted to reach out and let you know that is changing the way Sellers are rated. I am not overjoyed with what\'s happening, but I have to roll with it. IF you have a problem with my item, I would like you to use the \"Contact Seller\" link in the listing, or call me. Please don\'t open a case. Cases count against me even if they are resolved. I stand behind my items and will work out any problems that you may have with an item. So please contact me if you have a problem with an item I have sold you and don\'t use the Case as a means of communication.

International Buyers, Please Note:

Import duties, taxes and charges are not included in the item price or shipping charges. These charges are the buyer\'s responsibility.

Please check with your country\'s customs office to determine what these additional costs will be prior to offerding/buying.

These charges are normally collected by the delivering freight

(shipping) company or when you pick the item updo not confuse them for additional shipping charges.

We do not mark merchandise values below value or mark items as \"gifts\".

US and International government regulations prohibit such behavior.