This item has been shown 0 times.
Listed foran MGB, is an original rebuilt 3-main 1800cc engine. Motor has been thoroughly disassembled, freeze plugs and oil gallery plugs removed, hot cabinet power washed,examined for wear and damage. Engine block was bored 0.040 with new small dish 9.0:1 pistons and rings fitted and installed. Block deck was slightly surfaced 0.003-0.004" to true the surface. Mains were checked for alignment and lightly finished. Head was cleaned with new valves, valve guides, springs, and hardened seats installed. Machine work included 3 angle valve job and a light 0.005-0.007" removed from the surface of the head. Overall compression should be 9.3-9.4:1. Crankshaftmain and rod journals are both standard and have been lightly polished to 600 grit. New parts include anARP high performance head stud kit, 0.040 small dish 9.0:1pistons and fitted to borerings,engine bearings and thrust washers, new standard grind camshaft with the tachometer drive gear installed, cam lifters, rocker arm shaft, freeze plugs, oil gallery plugs, oil pump, water pump fan spacer rubber bushings, headset, conversion set, timing chain dual row and endless, exhaust and intake manifold head studs, thermostat, oil filter and spark plugs.Engine is painter the correct dark red paint obtained from Moss Motors.Camshaft was degreed at 108 ATDCon #1 Intake. Tachometer drive gear and housing are included.
This is a great upgrade for your MGA with spirited performance and very smooth idle.We can run and tune the motor on the engine stand if the buyer sends us their intake and exhaust system for an additional charge providing a motor that is ready for turn key installation. Video provided of running engine.
We try and make our engines very complete to make it as easy as possible to do a direct replacement or swap and can provide a reconditioned flywheel, new clutch assembly installed and aligned, distributor with optional Pertronix electronic ignition, cap and wires.
Shipping will be by truck and should range between$385.99 to $489.99. Local pickup is welcomed. There is a $65.00 pallet fee. We can provide a fully enclosed crate from U-Ship for a very secure transport at and additional charge which is the only way we will ship international. We will helpship international and have done so with several engines. Local pickup is more then welcomed.
Items are the picture unless otherwise stated. All items listed are, as is, with nowarranty unless other wise listed. Buyer is responsible for all shipping and crating charges. No refunds on items unless pre-approved. In the event of a refund, NO postage charges will be refunded. We reserve the right to ship via whatever shipper we choose to be the most reliable and economical.
We accept Pay-pal and all major credit cards. Contact must be made with sellerwithin 3 days. All items must be paid for within 7 days. E-mails will be answered on a daily basis.
We are a Restoration and Repair Shop," Foreign Car Enterprise"; 816 471 6687, currently listing 25 years of accumulated British Car Parts. Check our response to offer with confidence. OverSixty-Five hundred sales at a 99% approval rate, of manufactured and used British Car Parts. Thanks for looking.