1 PH, 1/15 HP, 115V, 1550/800 RPM, CW ROT
ARKTIC 59 motors are primarily used in the evaporator of commercial refrigeration walk-in coolers and freezers, but can be used in many air-moving applications demanding high efficiency and dependability with output ratings up to74.6 watts.
Electrical Summary

• Voltage: 115 (90-132) or 208-230 (180-264) V Single Phase
• Output: Peak output74.6 watts – 1/10HP rated at 1550 RPM
• Efficiency: ~68% peak
• Speed Range: 500 – 1800 RPM
• Speeds: 1 or 2 (speed regulated +/- 6%)
• Rotation: CW, CCW, or CW/CCW (determined from the lead end of the motor)
• Programmable: The ECM Toolbox can be used to change the number of speeds, RPM, and rotation direction

Mechanical Summary

• Type: 3.3” electronically commutated
• Shaft: Single, or Double shafts. 5/16” single shaft with single flat is standard. 8mm and double flat shaftsavailable
• Enclosure: Totally enclosed – air over required
• Bearing: Ball bearing with low temperature grease
• Mounting: Standard 0.5” - #10-32 studs on shaft end (2.8” bolt circle) Optional 0.5” - #10-32 studs on the opposite shaft end (2.8” bolt circle
• Operating Position: All angle
• Control: Integrated to motor, or remotely mounted

---