What we have up for offers here is a good used and excellent running 2-cycle twin cylinder air cooled, 35hp Kohler 340 free-air engine with accessories and more.This engine would be the perfect choice if you are looking for a good used small lightweight 35hp engine for any of your homebuilt projects including ultralights, hovercraft, airboats, gyros, PPC's, trikes, golf carts, land based applications or other projects requiring this horsepower range. If you have been looking for a replacement engine, or a new engine for a project, I think you will find 340 Kohler engine package to be a great choice! Engine is in good cosmetic and great mechnical condition and ready to mount and use. Now here is the full specs and whats included with the engine.
ENGINE SPECS: Model: K340-2FA Kohler, 338cc twin cylinder air cooled, 2-stoke.. Bore is 63mm and the stroke is 56mm. Horsepower is factory rated at 35hp.
IGNITION: Engine is currently set-up running the single Nippendenso CDI ignition with electronic timing advance..Magneto has both generator and lighting coils with AC 12V 120W output.
CARBURATION/FUEL: Fuel intake is via one Mikuni 30mm round slide carburetor which are pneumatically feed from a single outlet Mikuni fuel pump. Carb is equipped with a provision for remote choke.
COOLING: Cooling is provided via forced air running across the motor and or a free-air scoop
BASE ENGINE DATA: Engine case is all aluminum with the cylinders being a lightweight aluminum alloy.
PTO/DRIVE: PTO is the industry standard 30mm 1.125 tapered. Engine belt reductions, direct bolt prop hubs, coupler's and power transmission's set-up for this configuration. PTO spins counterclockwise as viewed looking directly down on the end of the engine.
WEIGHT/SIZE: Engine weighs 43 pounds as shown below with no electric start or drive... Engine sizing is roughly as follows, 11 1/4" from the back of the carb to the exhaust ports, 14 1/4" in height from the bottom of the recoil housing to the top of the spark plugs and 15 1/2" from the outside of the pull starter housing to the tip of the PTO . A nice small lightweight engine.
MOUNTING/APPLICATION: This model engine is equipped from the factory with a four hole arrangement on the bottom of the of the engine. This pattern will allow for motor plates, root tube set-ups and many other configurations for mounting. Engine can be ran and mounted in both the inverted, horizontal or vertical positions. It can also be ran in both tractor and pusher applications.
STARTING: Engine is fitted with the standard pull/recoil starter.
APPLICATIONS: This 340 Kohler would make a great choice for any of your ultralight, hovercraft and airboat fields where you need a small lightweight and compact engine in the free air configuration, but also would work out great in a ton of other land and water based applications. .
CONDITION: Engine is in excellent running condition and needs nothing. Compression checks out at 125+ with the engine also having excellent spark. Some light cosmetic wear here and there and a little oxidation here and there and such but not effecting use and nothing serious.(BELOW I HAVE ATTACHED 8 PICTURES OF THE ENGINE/ETC TO GIVE YOU A BETTER IDEA OF THE COSMETIC CONDITION). Engine is ready to bolt up and use on any application.
