style=\"text-decoration:none\" height=\"21px\" valign=\"middle\" face=\"arial\"
You are offerding on an rebuiltNPK H4XHydraulic Hammer
See this hammer being testedon the only full vertical test stand in the United States, Canada and South America on you tube
FEL-TECH Quality - FEL-TECH Tested - Certified Rebuilt
Finance now (Own or Lease) for 6% and under !!
FREE SHIPPING TO THE LOWER 48 STATES
Operating Weight1,100lbs500 KgCarrier Weight Min12,000 lbs5400 KgCarrier Weight Max16,000 lbs8,600 KgTool Diameter3.5in88.9mmHydraulic Flow17-22g/m64 to 83LpmPressure to Breaker1800-2200 psi152bar maxImpact Frequency600-750BpmEnergy Class
1000 Ft lb.
50 MM PINS INCLUDED
CENTER TO CENTER IS EITHER 9\" OR 13\" DEPENDING ON YOUR SETUP
WIDTH IS 10.877\" WIDE-Reducing spacers will be supplied at no cost if required.
FEL-TECH Hammer Division is the ONLY hydraulic hammer company in the United States, Canada and South America that has a full vertical hydraulic hammer test center on site. This means you are receiving a quality rebuilt product from a world recognized company.
Why do contractors send their hammers to FEL-TECH Hammer Divisionfrom48 states and Canadafor rebuilding?
THEY WANT IT REBUILT CORRECTLY......THE FIRST TIME.
Contractors do not need stories ! They need quality and production!
FEL-TECH Hammer Division has the only full vertical test center in the United States, Canada and South America.
Watchthis hydraulic hammer power cell being tested and certifiedat FEL-TECH
REBUILT TO PERFORM
REBUILT TO WORK
Free shipping to the lower 48 states
Our reputation, quality andtesting speaks for itself
You are offerding on an NPKH4XHydraulic Hammer
Includes an extra tool (Chisel or Moil point)
Tested on the only full vertical test center in The United States, Canada and South America. Only at FEL-TECH Hammer Division.
Finance now (Own or Lease) for 6% and under !!
READ ABOUT OUR FINANCE PLANS BELOW!
(we collateralize only the equipment we are financing, no blanket liens)
•Challenged credits OK, with a minimum FICO score of 500
•Bankruptcy OK with re-established credit
•Business based out of US and/or Canada
$8500.00
or best offer
Finance now (Own or Lease) for 6% and under !!
Buy, Finance or Lease
Corporate Office-United States
Sales-Global
FEL-TECH 3 Month Warranty-global
Service-Global
Installation-Global
Parts-Global
Rebuild Centers-Global
Shipping-Global
Customer Service-Global
We will includean extra tool bit (MOIL POINT OR CHISEL) at no charge
and free shippingin the United States
You know FEL-TECH Hammer Division as your worldwide source for hydraulic hammer wear parts for over 1500 models of hydraulic hammers.
You know FEL-TECH Hammer Division as the largest hydraulic hammer wear parts center in the world.
The following parts have been installed:
New Piston
4 x Tie bars and nuts
Upper bushing
Lower bushing
Seal Kit
Mounting pins are included
Tool (Chisel)
This mounting bracket can be altered to match your carrier requirements at no extra cost.
You will receive the following;
OneNPK H4XHydraulic hammer including;
1.ONE NEW AMERICAN MADE MOILOR CHISEL POINT
2. 2 MOUNTING PINS
3. TWO NEW HYDRAULIC HOSES
4. A NEW BATTERY POWERED GREASE GUN
5. OPERATOR INSTRUCTIONS
6. PARTS BREAKDOWN
7. GUARANTEED SAME DAY SHIPPING ON REPLACEMENT PARTS
8. FREE SHIPPING IN THE 48 STATES
9. DISCOUNTED INTERNATIONAL SHIPPING RATES
10. WORLDWIDE INSTALLATION SERVICES (QUOTES ARE AVAILIABLE)
8 A.M EST - 5 P.M. PST CUSTOMER PHONE SUPPORT
5 A.M EST – 5 P.M. PST EMAIL SUPPORT AT SALES@FEL-TECH.COM
\"IN ORDER TO OBTAIN A GLOBAL REPUTATION,FEL-TECH AND OUR WORKING PARTNERS MUSTEXCEL\"
Contractors around the world know and trust FEL-TECH Hammer Division for their products and their high standards when it comes to offering newand rebuilthydraulic hammers.
FEL-TECH Hammer Division has the only full vertical test center in the United states, Canada and South America.
Many contractors around the world now buy replacement wear parts from FEL-TECH Hammer Division because of their trust in our company for our products and services. Our services and products have allowed FEL-TECH Hammer Division to become the largest hydraulic hammer replacement wear parts center in the world. In many cases our competition now relies upon FEL-TECH Hammer Division for their quality hydraulic hammer replacement parts.
FEL-TECH Offers Financing for up to 5 Yrs
Buy any of our hammers on and you can apply for leasing or financing through FEL-TECH
Your new or rebuilthydraulic hammer can be financed without using or affecting your personal credit. The more equipment you finance using traditional financing, the more this impacts your credit score and uses up valuable emergency resources.
Construction equipment leasingon the other hand has no impact on your personal credit score, keeps your unsecured lines of credit available for emergencies and affords you much more buying power.
Construction equipment leasingalso offers tax advantages. Construction equipmentleasing increases your liabilities and that translates into a lower tax burden to the IRS.
Call 508-552-0023 and ask about financing
FEL-TECH FINANCE PLANS ARE THE BEST IN THE INDUSTRY
•Challenged credits OK, with a minimum FICO score of 500
•Bankruptcy OK with re-established credit
•Business based out of US and/or Canada
\"Our mission is to match your cash flows. If you wish to purchase a hydraulic hammer that is new to your inventory, we will delay your payments up to three months. This will allow you the time to build the cliental and income prior to starting your lease payments.It will also provide you with the time to complete your project on time and on budget. If you have slow times of the year, we will provide you with seasonal plans; you can choose three consecutive months per year that you will make no payments at all. If you have a need, please call us so we can discuss it.\"
\"What better way to add a profit center to your business than with lease to own financing. If you have a need for equipment we can add it to your fleet without disrupting your current business. We don\'t drain your cash (we finance 100% of purchase price including freight and set up charges); we don\'t tie up your assets (we collateralize only the equipment we are financing, no blanket liens); and the profits from equipment will make the payments and put money in the bank for you.\"
THE CONTRACTOR\'S 90 DAY PREFERED / DEFERRED PAYMENT PLAN
Begin the lease with one month’s payment and then take 90 days off. Use these 90 days to get the equipment in and generating profit, then begin making payments.STANDARD LOAN / LEASE PLAN
Twelve payments per year on your choice of a lease or loan. Choose your purchase option depending on your tax and accounting needs. New or used equipment OK.SEASONAL PAYMENT PLAN
This plan allows the lessee to take up to three months per year with no payments. If your cash flow is seasonal, this is a perfect plan.10 % DOWN PLAN
Put 10% down if you have the cash available. This will lower the monthly payment and it may be used to pay the purchase option at the end of the lease, or can be returned to you. You can still enjoy the benefits of the true tax lease with no “residual” payment at the end of the lease.3 X 100 PLAN
The lease begins with 1 payment down, followed by $100 per month for the next three months. This allows the lessee three months to get the equipment in and generating profit before beginning to make payments. It is also great for back ordered equipment, delays in production or to purchase equipment that isn’t really needed for a few months.3 X 200 PLAN
The lease begins with 1 payment down, followed by $200 per month for the next three months. This allows the lessee three months to get the equipment in and generating profit before beginning to make payments. It is also great for back ordered equipment, delays in production or to purchase equipment that isn’t really needed for a few months.
3 x 300 PLAN
The lease begins with 1 payment down, followed by $300 per month for the next three months. This allows the lessee three months to get the equipment in and generating profit before beginning to make payments. It is also great for back ordered equipment, delays in production or to purchase equipment that isn’t really needed for a few months.3 x 400 PLAN
The lease begins with 1 payment down, followed by $400 per month for the next three months. This allows the lessee three months to get the equipment in and generating profit before beginning to make payments. It is also great for back ordered equipment, delays in production or to purchase equipment that isn’t really needed for a few months.3 x 500 PLAN
The lease begins with 1 payment down, followed by $500 per month for the next three months. This allows the lessee three months to get the equipment in and generating profit before beginning to make payments. It is also great for back ordered equipment, delays in production or to purchase equipment that isn’t really needed for a few months.CONTRACTOR\'S CREATION APPLICATION
Create your own 3 x plan\" based on the cost of your Hydraulic Hammer.STEP-DOWN PLAN
This Plan is excellent to work around a specific job that may require the lessee to purchase a hydraulic hammer. Example: lessee has a job that will last 9 months and needs a hydraulic hammer to complete the job. He knows he will have great cash flow at the beginning. You may wish to make larger payments for the first year, and then reduce them thereafter
A HIGH QUALITY HYDRAULIC HAMMER WITH VERY LOW MAINTENANCE COST THAT IS COMPETITIVELY PRICED.
Visit our web site for more information about parts forhydraulic hammers: http://www.fel-tech.com/
sales@fel-tech.com
FEL-TECH Hammer Division
1 PullmanStreet
Worcester, Massachusetts 01606
TOLL FREE-1-877-U-BREAK-ROCK
(1-877-827-3257)
PHONE-508-552-0023
FAX - 508-552-0024
style=\"text-decoration:none\"