These boards are all assembled and originally came as kits. They are all good boards but new wires should be installed. The manual shows how you can configure the amps to work from 50 to 225 MHz. The amplifier boards have 1 transistor installed since this board was ordered with just one transistor and will work but just produce less power. I have all the original manuals which show how you can configure the amp boards to work in the frequency range of 50 to 225 MHz in 8 band splits. It even show the low and high band VHF TV frequencies so this amp can even work as a Video amp for TV broadcasting!The other 2 boards are the Stereo Generator and the 0.5 watt Exciter boards. The 0.5 watt Exciter boards could be connect to the amplifier to boost your output power! These are the Classic Boards made by Ernie at Panaxis and offer excellent performance! So basically you are getting...
2 x Panaxis FMA-5000 amplifier boards and plans with schematics.
1 x Panaxis SG Stereo Generator Board with plans and schematics.
1 x Panaxis FME500-6 0.5 watt transmitter/exciter board with plans and schematics.
Hopefully some mad scientist can put all this to good use!

---