The photos shown are of one of the actual units that we areoffering. It is representative of the condition of all the units, though theremay be slight cosmetic differences. They are in excellent condition, havingbeen reconditioned and include NEW flashtubes and modeling lamps. Also what\'sincluded: new power and sync cords, new PL7R reflector, instruction manual. Ships in new factorypackaging. A 90 day warranty is alsoincluded – buy with confidence! Made in USA.Photogenic 1250DR PowerLight® monolights are built to meetthe everyday demands of photo professionals. Their job is a lot like yours: toprovide exact and repeatable results in demanding lighting situations, day inand day out.
The PL1250DR has a 6 f-stop flash output range from 16 to500Ws. The unit delivers accurate, repeatable power to the flash tube everyflash, for consistent exposures. At full power it has a short 1/1300 sec. flashduration. Tight control of the flash output is accomplished through a digitaldisplay that allows for precise adjustments in 1/10 or 1/2 f-stop increments.Just like the flash, the bright 250W modeling lamp can be controlled to anyoutput level you need—full, proportional, manual or off. The flash tube is userreplaceable.
When you purchase a PowerLight, you gain the creativefreedom that comes from having dozens of compatible light modifiers to choosefrom: soft boxes, umbrellas and the entire Quick-Change line, including thoselegendary Photogenic reflectors.
Professionals trust Photogenic PowerLights for rugged build,consistent output, and reliable results.
· Fast 1/1300 sec. flash duration
· Digital display of flash and modeling power settings
· 500Ws
· 1.5 second recycle from full power
· 6 f-stop flash power range: 500~16Ws
· Repeatable flash output to ±0.05 f-stop
· GN 365
· 250W modeling lamp
· Flash and modeling output adjustments in 1/10 or 1/2f-stop increments
· Proportional, full on/off, or manual modeling lampsettings
· Flash OK light· Ready light
· Auto power discharge (flash dump)
· Photo slave
· Safe, low 5-volt sync voltage
· Heavy-duty 1/4\" sync socket
· Test-fire button
· Surge protection
· Internal thermal protection
· Extruded aluminum housing
· Works with Quick-Change™ light shaping accessories
Flash Power: 16 to 500 watt-seconds
Guide Number (ISO100@10ft.): 365 w/PL7R reflector; 110 w/no reflector
Flash Duration: 1/1300second at full power; 1/640 second at 1/32 power
Recycle Time: 1.5 sec. at full power; 0.5 sec. at 1/32 power
Power Control Range: Full to 1/32 power (6 f-stops); 0.1f-stop resolution
Modeling Light Power: 250 watt Quartz, ESS
Modeling Light Control Range:Full to 1/32 power (6 f-stops); 0.1 f-stop resolution
Triggering: Sync jack(5 volts); Push-to-test button; Built-in photo slave
Sync Voltage: 5V
Main Supply: 105 - 125 Vac, 60 Hz, 10 amps
Consumption: 0.2 amps idling, 15 amps charging
Voltage Stabilization: ± 0.05 f-stop
Fuse: 3AG type 15 amp, SLO-BLO
Housing: Extruded aluminum
Weight: 5 lbs. 8 oz.
Dimensions (housing only): 4.5\" x 4.5\" x6.75\"
FLASH TUBES AND MODELING LAMPS:
Flash Tube User replaceable. Use only Photogenic C4-15,C4-15C (color-corrected),
C4-15F (frosted) or C4-15D (frosted and color-corrected)
Modeling Lamp 250watt quartz halogen, ESS
Brands we manufacture include Speedotron, Photogenic,Norman, Smith-Victor, Quantum, Cool-Lux, Logan, Photoflex and Radiopopper.
You can check our website at [link removed by ] tosee a list of our brands. You can click on the individual brands to find adealer if you wish to purchase new equipment.