Renishaw PHC10-2 RS232 Motorized Probe Head Controller

PHC10-2 Head ControllerPHC10-2 head controller receives instructions from the CMM control.

The PHC10-2 controls all head functions and reports system status to the CMM.

Drives PH10 (PH10T, PH10M or PH10MQ) to position - sent either from the HCU1 or CMM.

Checks and reports positionFlags up errors, e.g. failure to reach position, obstruction before or after locking etc.

The PHC10-2 does not process any of the probe sensor signals.

PHC10-2 - SPECIFICATIONS:Length:220 mm,Width:289.3 mm,Height:88 mm,Weight:2.86 Kg,Data transmission:RS232,Current Consumption (at 240V):less than 500mA,Voltage range:85 V to 264 V 47/66 Hz automatic selection,Input connectors:15 way \'D\',Probe output connectors:7-pin DIN or 9-way \'D\' type,Mounting:Rack mounted or stand alone,Hand control unit:HCU1 only - not included