var itemNumber = window.ItemID ? window.ItemID : -1; function passpara(){return + itemNumber + \'&baseurl=\'+escape((function(){var d = return d })());}
JBMindustries Store
function passparaSC(){return \'&baseurl=\'+ escape((function(){var d = return d })()) + Rotax 377,447,503 Carburetor Holder Intake Socket Boot a.imagelink {color:#3E4241;} a:hover.imagelink {color:#3E4241;} a:visited.imagelink {color:#3B426C;} a.imagelink img.saleimage { border: 2px solid #3E4241; } a:visited.imagelink img.saleimage { border: 2px solid #3B426C; } Locking rib prevents carbs being \"thrown\"...
Thicker wall design
Automotive \"WORM\" type clamps can be used.

FIXED PRICE SALE-- ONEROTAX447, 377,or 503Carburetor Socket Boot made from a specialTSR material that will last. (This material is patented.) Designed to prevent rapid age cracking and vibration in the carburetor. ( Enter number you need when you buy it now.)

Original Rotax parts cost $38 each. Why pay that for a part that will rapidly age crack? This part is made to replace Rotax part # 867-484

You don\'t tolerate failed rubber parts on your car, so why should you be replacing sockets on your aircraft every few years?

This socket boot fits BING model 54 carburetors with 36mm venturior MIKUNI H4 carburetors with 37mm venturiused on Air Boats, Light Sport,and Ultralight Aircraft. This socket is designed to fitaircraft and is not a converted or stretched snowmobile socket.

• There is no need to smear them with grease or not tighten your clamps, as they will last without these measures.

A TESTIMONIAL FROM THE UAE:

We are currently running your sockets on 2 different 582\'s and have been very happy with them. The temps run very high here in the summer and our Rotax sockets showed signs of cracking in only 30-40 hours. We have been running yours for almost 300 on both machines.
Thanks,
Ken Bricker
Jazirah Aviation Club
Ras Al Khaimah, UAE

From CANADA:

I am happy to report that I have about 400 hours on your
stuff and it is holding up beautifully! Often customers don\'t report
back unless they are having problems and I thought that you might
like to know about a happy customer,,, ME!

Joe Harrington
Lethbridge, Alberta, Canada

I just wanted to email you and let you know I just installed the two 503 carb boots I bought from you and all I got to say is WOW
100% better than rotax...... Keep up the good work, I am eventually going to have ALL your products, that fit on my 503 ..
Gunna be ordering up some exhaust and intake gaskets in the near future...... Hope to see a 503 base gasket in your inventory soon ,as well...
Thanks,
Scott V.
A++++! Great product,fast shipping! Thanks!Buyer: wessel1651 ( 9 )Aug-29-09 20:18Rotax 377,447,503 Carburetor Socket Boot Bing 54 Mik H4 (#330346003792)

JBM Sockets are made in USA and are notforeign made sockets full of fillers. They are designed for Ultralight aircraft and not a Snowmobile adaptation that never fitsexactly right.

Socket has a lockingrib on both ends, so carburetor cannot be thrown, and includes new clamp screws. ( These sockets also work well with ordinary automotive hose clamps. ) Carburetor mounts on the end with 4 dots. It is clearly marked "CARB"

How to tell a genuine JBM socket: JBM Sockets are stamped on the end of the socket nearest the engine with " JBM".

This is a sale for a single socket, as some folks have a single carb.

Order one socket for each carburetor you have. ORDER NOW !

• Please enter the number of sockets you need at checkout.

This socketis areplacement for ROTAX part # 867-484... This socket comes with new screws for your clamps.

Buy direct from manufacturer. Over 4000 sockets sold worldwide.

You cannot buy these sockets from "Rotax Only" parts suppliers.

Made in USA. JBM Industries guarantees your satisfaction.

---