This item has been shown times.
SCHULZ SINGLE STAGE AIR COMPRESSOR PUMP 2 3 and 5 HP
Click on Thumbnails to Enlarge
-Schulz brand cast iron model 18 air compressor pump + free intake filter-
Filter as seen in picture is included with the pump!!
This listing is for a Schulz model 18 cast iron oil lubricated air compressor pump. This is a long lasting industrial quality pump with a 1 year manufacture warranty. This pump will work with 2, 3 or 5 horse power peak motor, these sizes of motors are usually 15-19 AMPS if your 5HP motor is 22 AMPS or larger you can use a larger pump than this. Keep in mind if using a 2 horse power motor you will have to spin the pump slower so it does not overload the motor, so the CFM output will be lower. With a 2 HP motor your CFM will be around 6-8 CFM on average, with a 5HP motor spinning at max RPM, your displacement CFM will be about 16-18. We recommend that you spin this pump between 700 and 1200 RPM for best results. Max displacement CFM is 18. This makes a great replacement pump for most any air compressor with a 2 - 5 HP motor with its slotted base it will adapt to a lot of tanks without any modification, if it does not fit your current pump mounting holes, new holes can easily be drilled. The head and cylinder of this compressor also can be flipped around to put the air outlet / discharge on either side of the pump for easy installation. If the fly wheel is a different size than the pump you currently have it is easy to calculate what size pulley you will need to put on your motor, (you take motor RPM x diameter of motor pulley and divide it by diameter of the pump pulley) that will give you the RPM you pump will be spinning. Dimensions and Specs below.
- 2 cylinder
- 3" pistons
- 125 PSI
- Oil lubricated
- 1 year warranty
- Fly wheel diameter 11.5"
- Fly wheel uses a section belts
- Air discharge port on head is 1/2" female pipe thread which measures about 3/4" in diameter
- Oil sight glass located on front of the pump for easy viewing.
- If looking at the front of the pump where sight glass is located the bolt mounting holes are 5 7/8" wide center to center, the bolt holes are slotted from front to back so the bolt holes from the front of the pump to the back can be anywhere 4 3/4" center to center to 6 1/4" center to center.
- Total width of pump 7"
- Total depth including fly wheel 12.5"
- Total height a little over 12"
-DON'T FORGET THE INTAKE FILTER IS INCLUDED!!
We accept returns within 30 days of purchase.
A 20% restocking fee applies on all items returned for a refund.
If you receive a manufacture defective item and want to exchange it there is no restocking fee.
No refunds will be given on items that have been opened or used and will be exchange only.
Anything being returned must include all original parts sent or fees will apply.
Buyer is responsible for return shipping costs to us. We will pay to ship the item replacement back to you.
All returns need to have a note included with the buyers information and reason for return or exchange.
At Compressor Source we are dedicated to our service for you! We ship all items within 24 hours of payment Monday-Friday. We are closed on weekends and holidays.
Most all items ordered by 12:00 Noon will ship the same day.
If for any reason there is an issue with your order we will contact you right away.
If you have any questions feel free to call us at 1-888-396-8676 or message us via the message system.
All Payments are made through PayPal. If you have any questions feel free to Message us via the message system at any time.
response terms text goes here.