MSIW50S SPARTAN IRONWORKER
STANDARD SPARTAN MSIW50S,HEAVY-DUTY, COMPLETELY INTEGRATED IRONWORKER WITH 50 TON CAPACITY, 5 H.P.,6-7/8” THROAT, 5 WORK STATIONS AND FULL CONTROL FOOT PEDAL
Capacities& Specifications Rated on 65,000 PSITensile
PUNCHING
Punch Pressure: 50 tons.
Punch Holder and Jog Mode.
Punch Work Table: Includes adjustable stops for x & y axis.
Adjustable See-Through Punch Stripper: For fast and easysetup.
Die Holder: Adjustable in machined T-slots for quickpunch and die alignment.
Standard Tooling: 1” in 1/2” (22 X 15mm) material. Maximum 1-1/2”in 5/16” (38 X 8mm) material.
Throat Depth: 6-7/8” (175mm).
Stroke Length: 1-15/16” (50mm).
Cycles per Minute in 3/4”: 20.
Punching Station Work Height: 36-3/4” (935mm).
FLAT BAR SHEARING
Flat Bar Shear Capacity: 11-3/4” in 1/2”
AngleFlange Trim Capacity: 3-1/8” in 3/8”
Lower Blade: Four (4) usable edges.
Support Table: Includes guides foraccurate positioning and indicator lines at 30 and 45 degrees left and right.
Upper Shear Blade: Provides for minimum distortion.
Blade Length:12-7/16”.
Flat Bar Shear Work Height: 36-3/4” (935mm).
ANGLE SHEARING
Maximum Capacity – 90 degrees: 4” x 4” in 3/8”.
Angle Shear Capacity-45 degrees: 2-3/4” in 1/4”
Shearing with no material loss and minimumdeformity.
Shear Blades: Four (4) usable edges.
Angle Shear Work Height: 44-7/8”.
BAR SHEARING
Max. Round Bar Capacity: 1-3/16”.
Max. Square Bar Capacity: 1” x 1”.
Four Cavity Round and Square Bar ShearSizes: Round - 1/8”, 1 3/16”; Square - 5/8”,1”.
Channel Shear Max. (optional): 3”.
H-Beam Shear Max. (optional): 3”.
BarShearing Work Height: 44-7/8”
NOTCHING
Rectangular Notcher: 1-3/8”” x 3” in 5/16”
Notching work Height: 36-3/4” (935mm)
Five (5) Sets of Punches and Dies:
Punches: 9/16”, 11/16”, 13/16”,15/16”, 1-1/16”
Dies: 19/32”, 23/32”, 27/32”,31/32”, 1-3/32”
CPD Series: 20 punch, 55 die
Magnetic Base Work Light
24 Volt DC Control Voltage
Scrap Boxes at Punching and Notching Stations
Adjustable Stroke Depth at Punch Station
Full-Control Foot Pedal
Two (2) Piece Gauging Table at Punch Station
Keyed Punch Holder for Shaped Tooling
Standard Voltage 230/460 Volt, 3 Phase, 60Hz.
Machine Shipping Weight: 2,570 lbs (1165kg).
Machine Dimensions: 56-1/2” L x 37.5” W 66-1/4” H
Machine is in pristine condition only used a handful of times. Machine is wired 230 3phase
Any questions please call Dustin At A.R.Tools and Machinery 509-922-2060 Thanks