Scription

• Module Brand：CSDWELL
• Rated Voltage：16V
• Absolute Max.Voltage：17V
• Rated Capacitance：32F
• Capacitance Tolerance：0%~10%
• Max. ESRDC,initial：84mΩ
• Absolute Max. Current：68A
• Leakage Current at 25℃：3.6mA
• Max.Series Voltage：750V
• Capacitance of Individual Cells：100F
• Number of Cells：12
• Short Circuit Current：730A
• Operating Temperature range：-40℃~65℃
• Storage Temperature Voltage Management：Active
• Cycle Life：≥500000
• Shell Material：Aluminium Alloy Structure Shell

• Auto Rectifies
• Wind Turbin Pitch control
• Small UPS systems

• 1×Ultra Capcaitor Module
• 1×Power Resistor
• 1×M6 Nut
• 1×M6 Using:
  1、If the Ultra Capacitor module(hereinafter referred to as Module) is zero voltage or under voltage,please charge the Module with charger or battery before usage. The output voltage of the charger orbattery should be less than 16V. First connect the power resistor between the positive pole of theModule and the positive of charger (or battery), then connect the negative pole of the Module to thenegative of the charger (or battery). Charge the Module around 20 minutes. Please do not touch thepower resistor to avoid burnt.
  2、 Disconnect the resistor on the positive pole of the Module, then connect the positive pole ofModule to the positive pole of the car battery.
  3、 If the Module will not be used within next 15 days, please remove the Module from the car batteryand store in room temperature.
  

  ---