VITOoiltester - Frying oil quality tester
VITO oiltester wasdeveloped for the measurement of all sorts of fryingmedium.
Functionality:
The VITO oiltester easily,quickly and reliably determines the quality of your oil. To do so, itmeasures the so-called
„Total Polar Material“ (TPM) content inthe oil and gives it as a percentage. The use of the oiltester alsoprevents too early
replacement of the oil. That reduces your oilconsumption by up to 20 %. The new VITO oiltester stands out thanksto its
ergonomic design, which prevents the direct exposure ofyour hand to the hot oil. The clear alarm via the coloredbacklit
display makes it even easier to evaluate the quality ofthe oil. The TPM limit values can also be individually defined,and
can, like other instrument configurations, be protected fromunwanted alteration by a PIN.
To optimize the benefit of the VITOoiltester combine it with the VITO oil filter system.
Allbenefits at a glance:
• VITO ensures the quality of youroil
• Change your oil at the right time, not too soon, not toolate
• Supports HACCP quality standards
• Ergonomic androbust design
• Rinsable under running water (IP65)
• Clearalarms via backlit display using the traffic light principle
•Hold and auto-hold function
• Calibration and adjustment can becarried out by the user
Technicaldata:
Sensortype VITOoiltester cooking oil sensor, cap. (%TPM); PTC (°C)
Measuringrange 0.0to 40.0 %TPM
+40 to +200 °C
Accuracy±1 digit ±2%TPM (+40 to +190 °C)
±1.5 °C
Resolution0.5%TPM (+40 to +190 °C)
0.1 °C
Storagetemperature -20to +70 °C
Oiloperating temperature +40to +200 °C
Operatingtemperature 0to +50 °C
Dimensions50 x170 x 300 mm
Weight255g
DisplayLCD,2-line, backlit
Batterytype 2AAA micro batteries
Batterylife approx.25 h continuous operation (corresponds to approx. 500 measurements)
Housingmaterial ABS/ ABS-PC fibre glass 10%
Reactiontime Approx.30 s
Protectionclass Upperand lower TPM limit value freely adjustable, visual alarm via3-colour display
backlighting (green, orange, red), values andillumination flash in the display until
the measurement is ended(Auto Hold)
