Wallenstein BX52R, Hydraulic Roller Feeding/Power Feed, 3-Point Mounted, PTO PoweredWood Chipper.

ExpectThisChipper & ALL Of The Equipment We Sell To Be Quality Equipment That Will Serve You Well ForA Lifetime And ProvideA Good Resale Value Too!

SEE A VIDEO OF THIS CHIPPER AT WORK AT THE FOLLOWING LINK:
Wallenstein BX52R Chipper Video

GENERAL FEATURES:

• The Hydraulic Roller Power Feed Feature Will Force Feed Material Into The Cutting Chamber & Includes \'Manual Feed Rate Speed Adjustment\' on the Control Valve!
• Chipper Has4Double Sided, Hardened ToolSteel, PresharpenedRotor Blades & 1Anvil Blade.
• 4Colors Are Available: Red, Blue, Green & Orange.
• This Listing Is For A\"Green\" Chipper.
• Although We Always Have BX52\'s In Stock,The Inventory Colors May Vary!
• Wallenstein Products Are Covered By A 5 YearManufacturers Warranty!
• Chipper Ships CompleteIncluding:
• All Hydraulic Controls & Hoses.
• Flow Control Valve Provides Infinite Speed Control with Forward & Reverse Functions.
• Two (Top & Bottom) Feed Rollers.
• PTO Shaft, Extra Shear Bolts and Even a Pair of Safety Glasses!
• BX52R Chippers With \'Intellifeed Speed Sensing\' Options Are Listed Separately.
• This Option Must Be Included With The Chipper From The Factory.

SPECIFICATIONS:

• The BX52R Chips 5\" Diameter Timber Or 10\" Wide Dimensional Lumber.
• 4 Hardened Tool Steel Rotor Knives are Double Sided to Double the Operation Time Between Sharpenings.
• Shear Bolt Protected, Direct 540 or 1000RPM PTO Drive provides Maximum Torque Transfer to the Rotor.
• Recommended Minimum Hydraulic Flow Requirement is 4 GPM\'s.
• Recommended Tractor HP:
• For Maximum Capacity, Min. 40HP Required.
• Applicable Range is 18 to 50HP.
• Cat 1, 3-Point Hitch.
• Overall Dimensions with Hopper Folded are 62\"L x 61\"W x 74\"H.
• Feed Hopper Opening is 30\" X 42\".
• Rotor Dimensions are 24.75\" Diameter X 5/8\" Thick & Weighs 125lb\'s!
• Discharge Chute Rotates 360 Degrees Continuously.
• The Continuously Rotating Discharge Chute Is Complimented With An Adjustable Deflector Tip.
• Discharge Chute Height is 74\".
• Shear Bolt Protected, Direct540RPM PTO Drive provides Maximum Torque Transfer to the Rotor.
• Weight is 845lb\'s.

Plus We\'re Glad To Say ThisWood ChipperIs Made In North America!
Provide Us With Your Zip Code ForA Quote Of OurAffordable Nationwide Shipping Prices!

TYPICALLY IN STOCK BUT YOU\'RE WELCOME TO CALL FOR AVAILABILITY!

Farm Equipment 24-7 store of Iowa Farm EquipmentA FULL SERVICE DEALERSHIPProviding Parts & Warranty Coverage Nationwide!563-946-2122

---