New Wideband, Extremely Low Noise Amplifier for HF/VHF/UHF Receivers, and for SDR tuners, for Airband and ADS-B Receivers
Features:- Operating frequency range: 2 MHz - 2.0 GHz- RF Gain (set to maximum): - 10 MHz: +16.2 dB - 500 MHz: +16.9 dB - 1 GHz: +12.9 dB- Low Noise Figure: 0.49 dB @ 500MHz- Low Current consumption: 80mA Typ.- Small dimensions, PCB is only 19 x 25 mm- Supply voltage: 7-15 VDC via PCB terminals / Phantom power over antenna cable- RF connectors: gold plated, SMA Female connectors, with 50 Ohm input/output impedance- On-board power indicator LED
Download full PDF- SDR tuners- Airband receivers- ADS-B Receivers- HF/VHF/UHF receivers- Amateur radio receivers, 2m/70cm etc...- FM receivers- PMR receivers
This professional, high quality, extremely low noise, wideband RF amplifier is designed to use with amateur radio receivers and with SDR tuners, like RTL SDR dongle. Circuit makes weak signals strong with excellent signal-to-noise ratio, so you will be able to receive transmission like never before.Current consumption is kept low; 80mA @ 7V
The amplifier is built withthe high quality MMIC from RFMD.
Thanks to the high-end design, you can power the amplifier 2 different ways;-Power from external power supply: you can use any power supply, wall adapter, or even batteries with output voltage rage from 7 to 15 V DC-Phantom power: circuit can be powered from a remote station over the coaxial cable (7-15V), so you can place the amplifier as close to the antenna as possible
Circuit has a built-in 5V voltage regulator, and it\'s protected against reverse polarity. On the board, you will find a small LED, that shows: power is OK!
The PCB size is really tiny, only 19 x 25 mm, so it\'s very easy and fast to upgrade your existing radio sets with this small, but really powerful amplifier.Mounting the board is also very easy, thanks to the 3 mm fixing hole on the board.
Package includes:- 1 piece of LNA (100% tested and assembled, ready to use)
Worldwide, fast shipping from Europe!