This is a running Williams WR-27 turbine engine. It is on a custom stand, and includes a start box, fuel pump, 12 to 24 volt soft start system, k style egt probe, and the needed electric start conversion, these come with hydraulic start units and unless you build a 3000lb accumulator unit,this needs to be done. It needs the sbt jet ski starter replaced, it\'s less then $100.00 here on . I used it to start and run this unit 50-70 times, I got a little over zealous on the 24 volts one of my last few runs and cooked the brushes. Look at pics, simple replacement. There are a lot of these out there with none of the conversions done, no start setup, etc. this is a \"add batteries and fuel\" (after starter replacement) and run engine. I will crate and ship anyplace in the USA for $150.00, or you can pick up in Oswego NY for free. I will go over all details of starting and running this unit. Some spec\'s below. Specifications: Working, Freely moving Turbine, Manual included
Type Turbine engine,APU Dry weight incl/generator 124.3 lbs Residual Liquids 2.4 lbs Total Weight 126.3 lbs Length 29.0 in Width 14.2 in Height 20.7 in Fuel MIL-T-5624, Grade JP-4 or JP 5 Burn Est. 14 Gph Oil MIL-L-7808 Cap. 1.76 Pint Usable Pressure 40-70 PSI Turbine Shaft Speed 100% 62,000 Rpm Max Over speed 66,000 Rpm Exhaust temp Std-Dry 1210* F Max Temp 1425* F HP. \"Estimated\" 70 - 80 *note* hp is usually a de rated number by 40-50%

---