FT-736R Power Supply Unit, repair kit.This is a set of high reliability aluminium radial leaded electrolytics to replace all capacitors in the FT-736R Power Supply Unit. The kit includes 2 power resistors which seldom fail but do run very hot and should be relaced with parts that have a higher power rating.The Panasonic/Nichicon electrolytic capacitors supplied in this kit are the same diameter and lead pitch as the original parts used, the modern replacements are generally of reduced height.
All parts in this kit have a higher voltage rating, All parts supplied have a higher working temperature of 105 deg C and reliabilty ratings >3000hr.The list belows shows capacitance value, working voltage, temperature range, physical size (diameter D, height H and lead pitch P) followed by the circuit/schematic location by part identity.The kit comprises 12 parts: 2 off each of the following device: 470uF 250V 105C 22Dx40Hx10P [C6,C7] 2 off each of the following device: 1000uF 35V 105C 16Dx20Hx7P5 [C21,C22] 2 off each of the following device: 1uF 50V 105C 5Dx11Hx2P [C12,C25] 1 off each of the following device: 680uF 35V 105C 13Dx20Hx5P [C26] 1 off each of the following device: 220uF 35V 105C 8Dx15Hx5P [C9] 1 off each of the following device: 68uF 50V 105C 8Dx15Hx3P5 [C8] 1 off each of the following device: 0.47uF 50V 105C 5Dx11Hx2P [C23] 2 off each of the following device: 33R 5W 5% Metal Oxide [R17,R18]
All kits dispatched within the UK postage FREE. Available worldwide, please check the postage cost to your area.We carry a comprehensive stock of FT-736R (and other Yaesu models) replacement semiconductors and hard to find parts.
if you are in need, please email us with your requirement.