3/4 to1/2
hi ron, i built a unit for 11 and used 3/4 pipe and the tee that goes to the motor is3/4 to1/2 and i can't find something to make the 1/2 smaller, I went to fish store and the plumber and no one goes smaller then a 1/2 any ideas? steve
|
Most pumps use a 1/2 inch hose that connects to a 1/2 hose connector that screws into the 3/4 inch tee.
|
All times are GMT -4. The time now is 01:03 PM. |
Powered by vBulletin® Version 3.8.9
Copyright ©2000 - 2024, vBulletin Solutions, Inc.