View Single Post
  #15  
Old 12-07-2009, 06:41 PM
txice txice is offline
Member
 
Join Date: Nov 2009
Location: Houston, TX
Posts: 88
Default

Quote:
Originally Posted by GpsFrontier View Post
Any angle fitting I would need to cut anyway because I don't want it to extend inside the tube.
This is probably the disconnect I was having. I was going under the impression that the smaller tube would fit "through" a cut made into the larger tube rather than it simply being glued or secured in some other fashion to the outside of the larger vertical tube.

Quote:
Originally Posted by GpsFrontier View Post
I would not need to alter the inside edge of the hole in the main tube at all because it wont be going inside but simply be glued to the outside.
Yep...indeed where the disconnect was. I see what you are talking about now.

Quote:
Originally Posted by GpsFrontier View Post
I think you mean more like push it in the right direction because P.V.C. does not bend unless heated just right.
No, what I actually meant was just the natural "bend" that would be in a 45 degree type fitting (i.e. the 45 degree angle itself).

Of course....had I read your description a little closer I'd have gotten a better understanding in the first place :P. I got side tracked by all the pretty pictures and kind of skipped over bits of the rest...hehe.

Last edited by txice; 12-07-2009 at 06:47 PM.
Reply With Quote