View Single Post
  #4  
Old 12-31-2016, 06:25 PM
GpsFrontier GpsFrontier is offline
Senior Member
 
Join Date: Mar 2009
Location: Lake Havasu AZ.
Posts: 1,855
Default

Hello newhydro16,
Don't worry about it, it's very easy. Most people do so much research they over think everything, but it's not complicated at all. First don't worry about PPM/EC/TDS or buying a meter to measure it. You don't even need a meter to measure pH. You do need to measure pH, but all you need is pH drops. In fact not only are the pH drops much cheaper, but more accurate as well. Electric meters can give false readings, but pH drops never will.

As for measuring PPM/EC/TDS, you don't need to. It's very easy to know what your nutrient strength is by fallowing the nutrient manufactures mixing directions. Nutrient manufactures will give directions on how much to use per gallon of water. That amount is for full strength nutrients. From their you can use it full strength or easily dilute as needed. Seedlings don't need nutrients at all until they develop their first set of true leaves. Once they do the nutrients should only be mixed to between 10% and 25% strength. Then when they get a little bigger increase it to 25% to 50% strength. Then once thy start to really start growing increase it to 50% to 80%-100% strength. No measuring of PPM/EC/TDS needed.

Most lettuce plants are a light feeder, so I wouldn't give them more than 75%-80% strength. Even though you don't need to measure PPM/EC/TDS, the PPM/EC/TDS charts can come in handy to determine if the plants you want to grow are heavy or light feeders, or somewhere in between. By comparing the PPM/EC/TDS values of plants that like higher nutrient strength, and those that like it on the lower end, you can easily determine if your plants are heavy or light feeders, or somewhere in between. Thus decide whether you should mix your nutrients full strength for heaver feeders, or on the light side for light feeders.

Now with that said and at the risk of making it more complicated for you, the water volume of your reservoir is important too. The bigger the plants get the more water volume they need as well. Mainly because bigger plants consume more nutrients, thus will deplete the nutrients in that water faster. The more water volume there is, the slower the plants deplete the nutrient levels in that water. That will affect how often you would need to change the nutrient solution to maintain a complete balanced nutrient. I wrote this article to help explain these factors. What size reservoir do I need

P.S.
While you may get varying opinions, don't worry about asking to many questions, that's what forums are for.
__________________
Website Owner
Home Hydroponic Systems

Last edited by GpsFrontier; 01-01-2017 at 07:14 AM.
Reply With Quote