![]() |
Home | Store | Blog | Forums | FAQs | Lesson Plans | Pictures |
|
|||||||
![]() |
|
|
Thread Tools | Display Modes |
|
|
|
#1
|
|||
|
|||
|
I also looked at those but could not figure out how to connect the tower to the base. The one for purchase is a moulded plastic piece.
|
|
#2
|
|||
|
|||
|
I will take some pictures over the weekend of what I have. Like I said earlier I wasn't able to perfect it. Even though I had sprayers at 2 different levels inside the tube to much water would leak out of the holes I drilled. I think I might have a way around it and will try it out over the weekend.
|
|
#3
|
|||
|
|||
|
I don't know if you have seen the drawing's I have posted before about a similar setup. So that is why I asked if you had any pictures. To see if what you built was similar to my ideas. If not, I may be able to help with some of my ideas, as well as with the construction methods I had in mind. If you don't start a new thread about it before I do, I'll post the drawings I have in a new thread about it soon.
|
![]() |
| Bookmarks |
| Thread Tools | |
| Display Modes | |
|
|