Home | Store | Blog | Forums | FAQs | Lesson Plans | Pictures |
#1
|
|||
|
|||
Germanation questions
Hello all, yet another newb here, with yet still more questions.
I've read through a ton of material on here and probably missed the answer to the question(s) I am asking, and for that I apologize. I am starting a basic Kratchy system in my office. I got all of the essentials and assembled. I soaked my rock wool to stabilize the ph, then dropped seeds and set the cubes into a 1020 tray to germinate. In the tray, I added a 1/2 gallon of light nutrient water. My Kale has been sitting in this for about 12 days now. It's 2 inches tall and starting to throw the their 3rd leaves. Question. I've read here the rock wool isn't supposed to sit in water, clearly my first mistake. I can fix that tonight, and let drain/dry. Does the wool not dry out and fail to provided the needed moisture to the plant? Second, when I set the rockwool into the baskets I am supposed to bring the water up to the bottom of the basket just touching the rockwool, or do I fill to 1/2" under the basket and let the roots reach down to it? Thank you for your assistance in the first of the million or so questions to follow. |
#2
|
|||
|
|||
Hello Rye,
Quote:
Personally, I prefer to use coco fiber. It's cheap, easy to use, and holds moisture well without suffocating the roots. I also attached some pictures of how I start seed using coco fiber. I simply use two Tupperware container's the same size so one fits snugly inside the other. I like using short ones for this so you don't have to fill tall ones with coco fiber, their just seedlings and it doesn't need to be deep. I use a cheap handheld soldering iron to make/burn a lot of holes all over the bottom, and part way up the side. You can make the holes any way you want, but I find the soldering iron the easiest and fastest. Then just like you would with potting soil, simply fill the container with the holes on the bottom with coco fiber about 3/4 the way. Put your seeds in, then top off with a layer of more coco fiber to cover the seeds to whatever depth it calls for on the seed package. I usually just use between 1/2 and 3/4 inch. Don't pack down the top layer of coco fiber, it will softly settle on it's own. Just make sure your coco fiber is already wet before you start, or it will float and take forever to absorb. Once you have your seeds ready, fill the other Tupperware container without the holes with plain water. Place the container with the seeds inside the one with the water and let the coco saturate with water for a few minutes. You can do this outside or in the sink so if some spills out it wont make a mess. After a few minutes of soaking take the container with the seeds out and dump the rest of the water out of the other one. Then set the container with the coco and seeds on edge so it's tilted so it drains quickly. Let it drain for 2 to 3 minutes. You can do that outside or in the bottom container. Now you can place the coco and seed container in the bottom one. You don't need to, but it will keep it from dripping and making a mess if you keep it in the house. I water them like this once or twice a day as needed. Once the seeds sprout and pop up through the coco fiber, you can start watering them with diluted (1/10 to 1/3 strength) nutrient solution. I make one gallon of full strength nutrient solution. Then to make the diluted nutrient solution, I just pour a little full strength nutrient solution in (about 25%), and the rest (about 75%) plain water. Instead of just dumping out the leftover after you water, you can save the diluted nutrient solution in a container to use next time. Just to make sure to keep it covered and in a cool dark place between watering. Quote:
P.S. The Kratky method is really nothing more than a standard water culture system without the air pump. I also go into detail about the pro's and cons of the the Kratky method right under the section about the water level. |
#3
|
|||
|
|||
thank you for the response and links! I've emptied the water out of the 1020 tray and am allowing the cubes to dry out at this point. I have "some" roots popping through the bottom, but not quite enough to reach down to the reservoir should I set that up. Do to time constraints I'll be setting up the tank and moving the cubes into the baskets on Friday, when they are two weeks old.
|
#4
|
|||
|
|||
Next stop, the documentation on Lights. I'm using a 4ft Jump start light I got from Groney's right now. I am assuming I'm going to need something with more output in the near future.
|
#5
|
|||
|
|||
Hello Rye,
Quote:
Quote:
|
#6
|
|||
|
|||
I have read the page, and decided that a metal halide will be the route I go. Mainly because as I work into this I plan upgrading the method and planting area of what I am doing. So, this first run will be Kale, the next probably spinach or lettuce.
From there I plan on going to an NFT system and growing about a 4x6 area. My T5 light won't be enough for that. So, I've selected this light and remote ballast. http://www.greenhousemegastore.com/p...st-grow-lights My thoughts are if/when I move up in production again to a greenhouse, I can move this light over to that. and continue to use it. |
Bookmarks |
|
|