Quadcopter/ Transmitter/Ground Station - ID Decal Sticker Upgrade Set
For Phantom 1 and Phantom 2 - UAVs, Quads and RC Transmitters
 
  - 
Buyers please look at my POSITIVE response from customers from all over the wold      This is the Original - Made in USA.
  This is NOT an inkjet print with lamination, This is a quality digital produced product from a commercial sign shop- UV printed and die cut on professional grade equipment.       
 
  - UV Resistant printing on high quality 3M exterior grade Controltac Vinyl that is designed for easy application.
 
   
  3M Installation Instructions:
  - Pick from backing sheet with xacto blade tip or razor blade, starting slightly outside the die cut to remove/pick the decal from the backing sheet.
  -  if the decal has no adhesive on it - you dug in to deep with knife and your peeling part the backing release sheet with the decal -
  - The adhesive side is metallic silver
  -  While on xacto blade tip.. position over the area for it to be applied.
  -  Smooth down with finger tips and smooth with a soft cloth.
  -  Can be repositioned with TLC.
  -  Any small air bubbles underneath the vinyl, if any will disappear in a short amount of time.
  - DO NOT USE YOUR FINGERS TO REMOVE from backing sheet!

  - White background  and Vibrant color and crisp text and graphics.

  - No more confusion - Easy to read at a glance!. 

-  Just remove from backing release sheet  and apply to your UAV/ transmitter and Ground Station.

90 Total Decal Stickers Included in the Set:
  • Set of 8 controller legends that fit around the stick controllers - 16 pieces
  • Start Up Checklist
  • LED Indicator  - Phantom/Vision Protocol  - 1 piece
  • LED Indicator  - Naza-M Protocol  - 1 piece
  • Control  Switch Functions - 2 sets
  • Battery ID Numbers
  • Motor ID Numbers
  • Clockwise & Counter Clockwise Directions - 2 sets
  • Reward ID Tags - 4 pieces
  • Switch and Plug Labels- 24 pieces
  • Quadcopter/FPV Icons - 5 pieces
  • Directional Arrows - 2 sets - 4 pieces
  • Phantom Stickers - 2 pieces

NOTES:

 • The outer Gray Lines in the Sticker Sheet illustration is used to show the shapes of the actual individual stickers on the sheet.
  • The Gray Outer Lines Do Not print on the final product.
  • The transmitter, case, or fatshark is not included - for demonstration purposes.
  • The stickers in the photos are for position examples only - You can apply them any place you desire.  • Check out our other items we have - http://www..com/usr/artopia