Now available for your inspection under power and purchase at the Warehouse our J-V Partner in Cincinnati, Ohio is this \"Excellent Operating\"Polamco Model TUR-63A, 25\"swing X 120\" cc Geared Head Engine Lathe, w/ 5 3/4\" Spindle Bore. Also has Taper Attachment, (2) 21\" 4 Jaw Chucks mounted on the front and rear if the shindle, and Inch and Metric Threading.We have run this machine through all speeds and feeds and find it to be in Excellent Operating Condition. Further, it is equipped with the very desirable Power Rapid Traverse in Both Axes, Inch and Metric Threading, and Taper Attachment. ThesePolamco Engine LathesareExcellent, Heavy Duty Engine Lathes Built With a Lot of Quality in Poland.

Specifications are as follows:

25\" x 120\" POLAMCO Model No. TUR-63A, 5 3/4\" Hole, Inch/mm, Front & Rear 21\" 4 Jaw Chucks, Taper Attachment, Power Rapid Traverse, and (2) Steady RestsPOLAMCO ENGINE LATHE
MODEL: TUR 63A
SERIAL NUMBER: 0181-42109, Manufactured New in 1981GENERAL SPECIFICATIONS:Swing Over Ways: 24 1/2\"
Swing Over Carriage: 14-1/2\"
Distance Between Centers: 120\"
Spindle Speeds: (18) 28 to 1120 RPM
Diameter Of Spindle Hole: 5 3/4\"
Spindle Nose: D1-11 Camlock
Tailstock Quill Diameter: 3-1/2\"
Tailstock Quill Travel: 8\"
Tailstock Spindle: No. 5 M.T.
Cross Slide Travel: 12-1/2\"
Compound Rest Travel: 6\"
Rapid Travel: 220 IPM
Number Of Feeds: 42
Longitudinal Feed Range: .0031 to .121 IPR
Cross Feed Range: .0016 to .060 IPR
Metric Threads: (42) 1 - 88mm
Inch Threads: (49) 1/2 - 88 TPI
Modular Threads: (42) 1- 88mm
Diametral Pitch: (42) 1 - 88
Leadscrew Diameter and Pitch: 1-5/8\" x 1/4\"
EQUIPPED WITH18 HP Main Motor
Front and Rear 21\" 4 Jaw Chucks
Inch/Metric Threading
Hard Ways
Taper Attachment
Thread Dial
Rapid Traverse
(2) Steady Rests
Chip PansApproximate Weight: 11,500 Lbs.PRELIMINARY SPECIFICATIONS SUBJECT TO VERIFICATION BY PURCHASER

You can see this very nice machine tool under power at our J-V Partners Warehouse in Cincinnati, Ohioby calling Andy or myself for inspection (see phone numbers below).This is a Polamco ModelTUR-63A Geared Head (Hollow Spindle) Engine Lathe built with a whole lot of quality inPoland. Overall, a \"Great Operating, Good Looking\"Engine Lathe with great ways that is ready to go to work. The appearance speaks for itself (see photo\'s). If you need a good Heavy Duty Engine Latheof this size with a 5 3/4\" Hollow Spindle, don\'t pass up this opportunity. You will have no regrets if you buy this machine.

We believe the new owner of thisPolamco ModelTUR-63A Geared Head Hollow Spindle Engine Lathe will be very happy with it.

We invite you to check our response and you’ll understand that we properly describe our items. The condition we state an item is in, is the way it will be when we ship it. We will load, free of charge on any truck or trailer. You always buy with confidence at Machine Tools of America. First of all, our descriptions are as accurate as we can possibly make them, and we\'ve been describing equipment for longer than we care to admit. Secondly, we offer our customers a 30 day, freight prepaid, full refund return privilege on everything we sell, unless otherwise specifically stated. If you’re not satisfied that this item is as we represented it to be, send it back to us and we’ll refund what you paid us. Every item we sell, unless otherwise stated, is available for inspection at our Miamisburg, Ohio Warehouse (515 Kercher St., Miamisburg, OH 45342). We request that the successful buyer contact us within 72 hours from commitment to purchase and pays in full for their purchase within 7 days, whether or not they have picked up their machine. We will store your purchase, free of charge, for a reasonable length of time, if time is needed to arrange for shipping. We accept Company Checks, Personal Checks, Bank Checks, Certified Checks, Bank to Bank Wire Transfer, Credit Card, PayPal, or even Cash.

We are:

Machine Tools of America and you can contact us by phone: Bruce at [phone removed by ] or Andy at [phone removed by ]. Our fax is [phone removed by ] or [phone removed by ] and the office phone is [phone removed by ], but we’re seldom there.

For ground shipping on flat bed, single drop deck, or double drop deck trailers, we recommend you contact the following: White Brokerage, Inc.; toll free phone number [phone removed by ](ask for Reenie), A&P Freight Services; toll free number [phone removed by ] (ask for Paul), Best Ways Brokerage Inc.; toll free number [phone removed by ] (ask for Lisa), Fastway Transport, Inc.; toll free number [phone removed by ] (ask for Chris). All four (4) of these companies are located in northwestern USA and are very adept at organizing partial capacity shipments at favorable prices to anywhere in North America.

Inform them that they will pick up your machine at Machine Tools of America’s warehouse at 515 Kercher St., Miamisburg, OH 45342. ThePolamco Engine Lathewill weigh approx. 11,500# and occupy 17’ of bed space. Further, inform them it needs tobe tarped.

---