Great old vintage effects unit. Has been well used but functions normally and sounds surprisingly good. I love this thing but need to make room for baby. Comes with the power supply!Product Details:

The Midiverb connects easily with RCA jacks between any line-level signal source and any line-level destination such as a PA mixer or recording console. Mixing dry and reverb signals is accomplished by use of the mix control at the rear of the unit.The dry signal routed through the mix control is maintained in stereo. If a stereo result is desired and the source is mono, route the mono signal to both inputs. A simple Y cord will accomplish this and allow the dry signal to appear in both channels equally with the reverb in stereo.

This is a particularly simple setup when adding ambiance to a drum machine without requiring console sends and returns. The only requirement here is that the signal source have an output level control so that proper driving levels can be set.

When connecting to the sends and returns of a console, rotate the mix control to full reverb (counter-clockwise from rear); the deepest returns will be available for mixing at the board.

The spread of the Midiverb\'s output stereo image is wide. While effective in opening up a clear mono space in a mix , the spread can easily be narrowed by the use of the mixer\'s reverb return pan pots.

---