This item has been shown 54 times.
High Pressure Air Drain Blaster Pump Plunger Sink Pipe Clog Remover + 4 Suckers:
brand new and high quality.
ABS gun body, rubber blocked head
Dimensions: 27.5cm x 28cm x 9.5cm/10.8" x 11" x 3.7"
pipeline: suit for hard pipe: cast iron pipes, PVC pipes, PPR pipes; Not
suit for soft pipe: rubber hose, plastic hose, others.
blockage: suit for: hair, vegetable, accessory; Not suit for: urine alkali,
cement, hard object. It can effectively remove hairs, cloth, tea, vegetable,
rubbish from pipeline.
pipeline dredge takes advantage in high pressure to remove blockage from the
suckers can be used in different size of pipelines, washbasin, sink,
bathtub, floor drain, squatting pan, toilet and etc.
handle about 15 to 25 times, repeat several time until remove the blockage.
use should be blocked according to the size of the pipe diameter, shape to
select the appropriate "plug" to install.
installing the "plug", you can begin to inflate the cylinder.
is, the left hand grasping solid body, right hand holding the handle, tic
breathing, complete the whole trip twitching at least 10 times, until the
best pressure until the best.
point the gas cylinder has been under pressure, cheer, such as product
"plug" tightly pressed against the outlet, so that closed, then quickly pull
the trigger, hit the air flow, the pipeline in the plug should be pushed
repeated operation of this action to the final confirmation of the pipeline
flow, if the toilet and the pipeline without water, you can add some hot
water to the pipeline thermal expansion and contraction, later to operate.
allow 1-3mm error due to manual measurement.Pls make sure you do not mind
before you offer.
color may have different as the difference display,pls understand.