I have a Icom IC-7000 Transceiver for sale with many extra\'s. Included is the Original Microphone and power cord and manual. Also included is New, never used body mount bracket with box, head bracket with box, separation cable, pigtail plug (for amp hook-up and other accessories) , Another plug just like it but no wires on it, plus all the screws that come with the brackets.. The radio works great.. It is in really good condition besides a few tiny scratches on body and little wear by the heatsink. You can see condition in pictures. I would rate it 9.5 out of 10.. I went through the radio and replaced all 4 PA\'s.. So they are all brand new from RF Parts basically making it a new radio transmit wise. these radio\'s are known for their thermal grease to dry up over time and then take out the PA\'s. Which is what originally happened to this radio. Which was the UHF PA that leaked and then weakened the HF one\'s. So I figured why not just replace the VHF one too so they are all new. So I replaced them all and applied new thermal grease that will last way longer then Icom\'s cheap stuff and made sure everything was aligned and Now it is 1 great radio. I have also used it for some time for testing and have had nothing but great results and great audio compliments.. So you can purchase another one used that has not been re greased and with older PA\'s or purchase this one knowing that it has been redone with all new PA\'s and re thermal greased to last many more years. Radio was never ran mobile as you can see by the brackets never being used or the separation cable.. Only reason I am selling is because I am trying to buy another radio (Anan or Kenwood 990) so I am selling a good amount of my collection..What you see in the pictures is what is included. If you have any questions message me on here or call me. My phone number is in the shipping details.. Pictures show new PA\'s soldered in and what it looks like finished so you can see the work was done. This would be around the 6th Icom 7000 I had fixed and years later they are still going with 0 problems. You will be very happy with your purchase. As with any used electronic Item I am selling AS-IS but guaranteed to work 100% as explained above and will be shipped safe and secure. If Shipping is less then what I have listed I will refund the difference. Radio will be sent insured..Thank You for looking at my sale and Happy \'ing... Specs for radio are below.
GeneralFrequency MHz*2
400.000–470.000 MHz*2
1.800– 1.999 MHz
3.500– 3.999 MHz
5.3305, 5.3465, 5.3570, 5.3715, 5.4035 MHz*3
7.000– 7.300 MHz
10.100–10.150 MHz
14.000–14.350 MHz
18.068–18.168 MHz
21.000–21.450 MHz
24.890–24.990 MHz
28.000–29.700 MHz
50.000–54.000 MHz
144.000–148.000 MHz
430.000–450.000 MHz
*1Showing USA Version. Varies according to version.
*2Some frequency bands are not guaranteed.
*3USB only.ModeUSB, LSB, CW, RTTY, AM, FM, WFM (Rx only)No. of memory channels503 (495 regular, 6 scan edges and 2 call)Antenna connector
SO-239×2
(for HF/50 MHz and 144/43/440 MHz bands; 50Ω)
Temperature Range
-10°C to +60°C;
+14°F to +140°F
Frequency stabilityLess than ±0.5 ppm (+0°C to +50°C; +32°F to +122°F)Power supply requirement13.8V DC ±15%Power (W×H×D)
(projections not included)167(W)×58(H)×180(D) mm;
69/1(6(W)×29/32(H)×73/32(D) in.Weight (approx.)2.3kg; 5.1lbReceiverIntermediate frequencies
SSB, CW, RTTY, AM, FM
WFM
124.487 MHz, 455 kHz, 16.15 kHz
134.732 MHz, 10.70 MHzSensitivity (Pre-amp: ON)
0.5-1.8 MHz1.8-29.9 MHz50-54 MHz144/440 (76-108MHz)SSB/CW, AM : 10dB S/N, FM, WFM : 12dB SINADSquelch sensitivity
SSB
FM
(Pre-amp: ON, threshold)
Less than 5.6µV
Less than 0.3µVSelectivity
SSB (BW: 2.4kHz, sharp)CW (BW: 500Hz, sharp)RTTY (BW: 350Hz)AM (BW: 6kHz)FM (BW: 15kHz)(representative value)
More than 2.4 kHz/–6dB
Less than 3.9 kHz/–60dB
More than 500 Hz/–6dB
Less than 900 Hz/–60dB
More than 360 Hz/–6dB
Less than 650 Hz/–60dB
More than 6.0 kHz/–6dB
Less than 15 kHz/–60dB
More than 12 kHz/–6dB
Less than 20 kHz/–60dBSpurious and image
rejection ratioMore than 70dB (HF bands)
More than 65dB (other bands)
(except 1/2 IF through on 50MHz, IF through on 144MHz)AF output power
(at 13.8V DC)
More than 2.0W at 10% distortion with an 8Ω loadEXT SP connector2-conductor 3.5 (d) mm (1/8″) / 8Ω
IF DSP — First in its class
Digital IF filter, manual notch filter, digital twin PBT and more. The latest digital features are incorporated in this compact radio from two DSP chips that deliver superior processing performance. Of course, those features work on all ham bands, from HF to the 70cm band.
AGC loop performance controlled by DSP
You will never experience AGC pumping from a signal filtered out by the DSP system. The digital IF filter and manual notch filter are inside the AGC loop, so you will not encounter AGC blocking. The AGC time constants are flexibly adjustable from slow, middle, fast (or AGC-off) for each operating mode.
Digital IF filters
All the filters you want at your fingertips! You will never have to purchase \"Optional\" filters as the IC-7000 has adjustable digital filters. You just dial in the width you want and select whether you want a sharp or soft filter shape for SSB and CW modes. Then to pull-in the the weak ones, with a quick turn of the concentric twin PBT knobs, you can either narrow the IF passband, or shift the entire passband to eliminate the QRM.
2-point MNF (Manual notch filter)
Pull out the weak signals in crowded band conditions with Icom\'s NEW two-point MNF (manual notch filter). Apply 70 dB of rejection to two signals at once! Notch width is adjustable-wide, medium, and narrow - and an auto-tuning notch filter is available, too.
Digital noise reduction
Noise reduction reduces background noise and improves signal-to-noise ratio. The noise reduction level is adjustable in 16 steps. It improves the readability of voice and data signals.
Digital noise blanker
The noise blanker reduces pulse-type noise such as engine ignition and sparking. The NB level and width (blanking duration) are adjustable in 100 steps.
35W output in 70cm band
High power MOS-FET amps supply 35W output power on 430/440MHz band as well as 100W on HF/50MHz bands and 50W on 144MHz. It provides stable, high quality output with low IMD and low spurious emissions even during high duty cycle and extended operation.
High stability crystal unit
The IC-7000 incorporates a high-stability master oscillator, providing 0.5ppm (-0°C to +50°C). A must for data mode operation.
DDS (Direct digital synthesizer) circuit
Icom\'s original DDS (Direct digital synthesizer) circuit improves the C/N ratio, providing a clear, clean transmit signal in all bands.
Compact, all in one package
The IC-7000 sheds 20mm (25/32in) of depth compared with the IC-706MKIIG.
Its compact body is easy for carrying outdoors or mobile operation.
User-friendly key allocation
Eight of the most-used radio functions such as NB, NR, MNF, and ANF are controlled by dedicated function keys grouped around the display for easy visibility. One quick touch turns the function on and off. A longer touch activates adjustment of the function-s setting.
Digital voice recorder (DVR)
Record your callsign, CQ, or other information in 4 transmit playback memories with alphanumeric labels. A total of 90 seconds is available for the four memories. A front panel REC control allows you to record incoming signals for up to 25 minutes (99 channels)*. The DVR makes portable contesting or mini-expeditions a breeze!
* Up to 120 seconds per channel
Built-in RTTY demodulator
The RTTY demodulator and decoder are built-in. External units and PC are no longer required for decoding. The twin peak audio filter reduces interfering signals overlapping the tones and the tuning indicator helps you zero-in with accurate tuning.
Remote control microphone, HM-151
The HM-151 has a 10-keypad for quick channel selection. The triple band tacking register memorizes the last three frequencies and modes used on each band. Push the band button once to three times to recall the channel setting. The F-1 and F-2 buttons are programmable as shortcut menus of your often used functions.
2.5 inch color TFT display
The 2.5 inch color TFT display presents numbers and indicators in bright, concentrated colors for easy recognition. You can choose from 3 background colors and 2 font styles to suit your preference, in addition to a large operating frequency readout. And more, the Video output jack on the rear panel allows you to view a magnified display on an external monitor*.
* 3.5(d) mm monaural cable is required for connection.
SSB transmit bandwidth adjustable
The SSB transmit bandwidth is selectable from 100, 200, 300, 500Hz at the high-pass edge, and 2500, 2700, 2800, 2900Hz at the low-pass edge respectively. 3 types of high and low combinations can be set in the quick set mode.
2-mode band scope
The band scope function lets you watch conditions around the band and visually assists in finding other stations. In center mode the band scope range is centered on the receiving frequency (±10kHz to ±250kHz). In Fixed mode the band scope sweeps a fixed range.
Multi function meter and SWR graphic display
The IC-7000 displays power level, SWR, ALC and compression level of the speech compressor. The SWR graphic display is useful for tuning antennas. The measuring step is selectable from 10/50/100/500kHz steps and the number of measuring steps is adjustable from 3 to 13 steps.
Other outstanding features
- Front panel separation with optional 3.5m/5m separation cable
- Selectable main dial tension from heavy, light and click
- RF speech compressor controlled by the DSP
- CW full break-in
- CW receive reverse
- CW pitch adjustable
- Tone squelch in FM mode
- 503 memory channels
- Built-in voice synthesizer announces operating frequency, mode and signal strength
- Duplex mode and automatic repeater function
- Transmit monitor
- DTMF monitor
- 1Hz tuning
- VOX
- CI-V interface
- RTX
- RF/SQL knob
- Large speaker
- Auto TS function
- Thermo control silent cooling fan
- Noise squelch and S-meter squelch
- Preamplifier
- Dial lock
- 20dB attenuator
