Eastwood Multi-Unit Welding Cart - MIG TIG Plasma MIG135 MIG 175 MIG250 TIG-200 & Universal

This welding cart is designed by The Eastwood Company to make storage, accessibility and maneuverability of your welders and welding equipment easier than ever before. This cart will fit the following Eastwood models, but will also fit many other brands. (See dimensions below)

This cart incorporates a top shelf which will hold the MIG135, MIG175, MIG250 or theTIG-200 welder. The bottom shelf will store your Versa Cut Plasma Cutter while the middle shelf allows storage of necessary welding accessories. The Gas Bottle Mount even incorporates a TIG Rod Holder to store up to 6 different tubes of filler rods. Assembles with simple hand tools.

• The design of the top shelf allows for the side access door on the MIG’s to be opened without taking the welder off the cart
• Heavy duty front castor wheels
• Molded Heavy Duty Rear Wheels
• Satin Black Powder coated finish
• Cut out in rear to allow plasma cutter cable routing through the rear of the cart
• Holds up to an 80CF Gas Bottle
• Front Mounted Handle for easy maneuverability around the shop
• Two side hooks for cable storage

Welding Cart Dimensions:

Total Height - 26\"

Total Width - 16\"

Total Length (not including Handle) - 32\"

Total Length (including Handle) - 38\"

Top Shelf Width - 11.75\"

Top Shelf Length - 20\"

Middle Shelf Width - 11.75\"

Middle Shelf Length - 15\"

Bottom Shelf Width - 11.75\"

Bottom Shelf Length - 17.5\"

FREE SHIPPING!!!! andNO SALES TAX!!!!

-Ships within 1-3 business days

-Free shipping is to lower 48 States only and does not include; PO Boxes or Military Addresses.

-No sales tax excludes Ohio residents.

Customer Reviews:

• 
  
• 
  
• 
  
• 
  
• 
  
4 out of 5Quality of Product
• 
  
• 
  
• 
  
• 
  
• 5 out of 5Quality of Product
  • 
    
  • 
    
  • 
    
  • 
    
  • 
    
  5 out of 5
  Overall this cart is pretty decent. It\'s fairly large compared to some of the others I looked at which I liked. Has enough room to fit welder, plasma cutter, and accessories. Medium or large gas bottle does not fit well however without slight modification to u shaped bracket that bottle rests against at the top. Overall it will serve its purpose well to use in my garage.
  ✔Yes,I recommend this product.Value of Product
  • 
    
  • 
    
  • 
    
  • 
    
  • 
    
  4 out of 5Quality of Product
  • 
    
  • 
    
  • 
    
  • 
    
  • 
    
  4 out of 50 people found this review helpful.0 people did not find this review helpful.Helpful?Yes ·00 people found this review helpful. Click to agree.No ·00 people did not find this review helpful. Click to agree.Report
  This cart was sturdier than expected. As someone else said, \"far better than harbor freight\". And you will need washers to make it really nice. Bolts are long enough to put washers on both the nut side and lock washer side. I did have one bolt strip out. However it really didn\'t strip. The nut was the wrong size. I think some sae nuts got mixed in with the metric nuts. I found the right size nut and it tightened perfectly. I recommend this cart for the price.
  0 people found this review helpful.0 people did not find this review helpful.Helpful?Yes ·00 people found this review helpful. Click to agree.No ·00 people did not find this review helpful. Click to agree.Report
  Purchased this item a couple weeks ago; and finally got a chance to assemble it last evening. Went together in about 20 minutes. Good looking piece of equipment. Using it for an Eastwood MIG 135 recently purchased as well. Finished assembling the MIG unit today as well. Did not get to \"test-drive\" the welder as of yet until I can pick up a tank of gas. Very pleased with the purchases. Gladly recommend to others.

  

  ---