CNC Express™Milling Machine

The CNC ExpressSQ Modelhas ample 20\" x 9\" travels to accommodate your larger parts! Now with even more powerful motors!!

The CNC Express SQ is well proven, offers a good size working envelope, runs on 115 or 230 VAC single phase power, has high speed machining, and accommodates coolant, and spindle control. The custom made anti-backlash ballscrews allow precision conventional and climb milling operations as well as accurate circular and contour cuts along any pair of axes without time consuming setups. Offering impressive machining power, repeatability, in a relatively small footprint. The square column CNC Express Milling Machines are available in two sizes, the CNC Express SQ medium size and the extra large CNC Express XL Gearhead models! Compare the specifications and choose the one that is right for you.

• The Stand, tray and basic accessories are included with the system at no extra charge.
• Our own custom designed software is complete with built-in graphic test mode and geometry wizards! Other systems use generic 3rd party software and they have no control on features or updates.

  » FAST!!! Precise, powerful, and over 150 in/min rapids!

  » Compatible!!! Supports the latest operating systems and includes our advanced USB motion controller!

  » Guaranteed!!! Five year warranty on electronics, free software updates, and expert technical support.

  » Free Extras!!! Includes the stand, chip tray, accessories, and professional crating (Domestic orders) all at no extra charge.

  DriveRack

  MN400 Motion Controller (Included in DriveRack)

  MillMaster Pro for Windows
  High SpeedsThe latest technology constant current chopping drives used in the DriveRack power electronics result in very high feed and rapid rates, while our fully optoisolated motion controller insures maximum reliability with the use of opto-isolated inputs and outputs on ALL connections. Other systems may use direct connection or a printer port whose reliability is typically not suitable for industrial applications.Low Cost AccessoriesSince our CNC machines are designed around existing manual machines, they accept standard tools and accessories. This means you won\'t have to spend a fortune on specialized or custom tooling. The most commonly needed ones are included with the package for convenience and added savings. We also offer a full assortment of practical tools and accessories to choose from below in the optional accessories section.QualityMicroKinetics CNC systems are expertly built and performance tested to conform to stringent standards. Detailed assembly and testing procedures and checklists are followed to insure consistent, repeatable, high quality machines. All components are individually tested and the complete system is tested again as a unit before shipment.Industry LeaderMicroKinetics offers the best reasonably priced CNC systems and knowledgeable technical support in the industry. Five year warranty on electronics and one year warranty on mechanics. MicroKinetics has been offering CNC systems to educational institutions, hobbyists, research facilities and small machine shops since 1985 using the same business philosophy, expert engineering and technical support!SPECIFICATIONS:
  Parameter

  CNC Express (Also available)

  CNC Express SQ (This listing)

  CNC Express XL (also available)

  X-axis Travel

  17.00\" (432 mm)

  20.00\" (508 mm)

  28.00\" (711 mm)

  Y-axis Travel

  7.00\" (178 mm)

  9.00\" (229 mm)

  12.00\"(305 mm)

  Z-axis Travel

  5.00\" (127 mm)

  5.00\" (127 mm)

  4.75\" (121 mm)

  Resolution

  .00025\" (.00635 mm)

  .00025\" (.00635 mm)

  .00025\" (.00635 mm)

  Column Type

  Round Column

  Dovetail

  Dovetail

  Head Movement

  Swivel 360 Degrees
  15 7/8\" (403 mm)

  Tilt 90 Degrees Left
  90 Degrees Right

  Tilt 90 Degrees Left
  90 Degrees Right

  Table Size

  8 1/4\" × 28 1/2\"
  (210 mm X 724 mm)

  9 1/2\" × 32 1/2\"
  (241.3 mm X 825.5 mm)

  9 3/8\" × 39 1/2\"
  (238 mm X 1003 mm)

  Spindle TaperR-8 R-8

  R-8

  Spindle Speeds

  12 speeds Belt Selectable
  120-2500 RPM

  *New* Variable Speed 100 to 3000 RPM with included VFD. Torque selectable via gearing

  *New* Variable Speed 100 to 3200 RPM with included VFD. Torque selectable via gearing

  Spindle Motor2 HP AC2 HP AC2 HP AC Power Req (Spindle)230VAC 1 PH 10 Amp230VAC 1 PH 10 Amp230VAC 1 PH 10 AmpPower Req (Control)115VAC (230 optional) 1 PH 15 Amp115VAC (230 optional) 1 PH 15 Amp115VAC (230 optional) 1 PH 15 AmpFloor Space & Height

  42\" Deep ×58\" Wide x 62\" Height
  (1.07 m x 1.47 m x 1.57 m)

  46\" Deep ×66\" Wide x 68\" Height
  (1.17 m x 1.68 m x 1.73 m)

  50\" Deep × 80\" Wide x 75\" Height
  (1.27 m x 2.03 m x 1.91 m)

  Net weight

  700 lbs. / 317 kg.

  765 lbs. / 347 kg.

  1000 lbs. / 454 kg.

  Gross weight

  810 lbs. / 367 kg.

  875 lbs. / 398 kg.

  1115 lbs. / 506 kg.

  CNC Express Unique Advantages:
  • NEW!!! More torque where it counts - Our NEW, custom made 750 oz-in motors deliver 41% more torque in bipolar drive method used here plus a 2 to 1 pulley ratio produces over 1500 oz-in of torque at the drive shaft. This maximizes the torque available at the full range of speeds, not just the holding torque. The overall performance with a properly engineered system of mechanics and electronics results in very impressive forces at standstill, at typical cutting speeds and at rapid positioning speeds.
  • Limit switches included in both directions on X and Y and up direction on Z for more convenient referencing and for end of travel without relying solely on mechanical dead stops. Mechanical dead stops provide excellent redundancy which comes into play in the event a limit sensor is not recognized for any reason. While the electronic limit sensors almost never fail, it is great to have this design for setup and testing.
  • Lifetime timing belts that are overdesigned. to never break or need replacement in this application but are important in achieving low vibration and smooth operation.
  • High voltage drivers offer impressive high speed performance (over 150 Inches per minute typical).
  • No thrust bearings - We use high performance tapered roller bearings. Many other competing models use thrust bearings which limit the speed andfeatures or updates. We listen to our customers and add features regularly. Now MillMaster pro offers more G-codes and M-codes than ever, plus Windows 10/8/7/Vista/XP Control Software

    MillMaster Pro for Windows controls and graphically simulates a 3-axis milling type CNC control on any PC running Windows 98/2000/XP/Vista/7/8. The CNC part program can be typed directly into the editor screen, or can be generated via a CAD/CAM program. The interactive mode allows you to see the operation performed graphically as you type each CNC line, aiding in part program development or training. For documentation purposes, you can print the graphics screen and the part program together or separately. True circular interpolation on any two axes and simultaneous linear interpolation on all axes are standard. This allows full 3-D surfacing designs to be run on the target 3 axis machine.

    Included Accessories:
    • Bed mill base system with 2 HP single phase or 3 phase motor
    • 5TPI (.200\") ballscrews at .003\" per foot max linear error
    • Stepper motors (2) 34M750 (1) 23HT350
    • DriveRack high performance power Multidriver
    • MN400 Continuous contouring motion controller
    • MillMaster Pro for Windows G-code control & graphical software
    • Limit switches, cables, and technical manuals.
    • Included accessories: Cabinet stand with chip pan, shelf and latched door plus the following pictured accessories:

    52 Piece Clamping SetDrill Chuck with Key4\" Precision CNC ViseFace Mill with 4 HSS insertsDrill Chuck Arbor
    

    Optional Accessories

    Splash Guard
    #999-6500-020

    Covering the front and both sides of the table, this shield provides an added safety measure and retains chips and fluid, keeping the work area clean. The front forward slant design offers improved functionality. No drilling or tapping is needed - the guard mounts easily with two thumbscrews (provided).

    6\" and 8\" Vertical/Horizontal

    CNC Rotary Table

    6\" Table #900-0095-006
    8\" Table # Coolant System
    #999-6500-010

    Increases tool life, lubricates metal cutting process and reduces heat buildup. Use with water soluble concentrates and light cutting oils. It comes complete with a tank , pump, 6\' plastic hose, flexible nozzle with valve, and a screen strainer. The pump comes with a 6\' 3-conductor cord with a three- prong plug 110VAC. 110V to 220V transformer available.

    6 PC HSS 2 Flute End Mill Set
    #999-6500-050

    • High Speed Steel • 3/8\" shank • Includes six 2-flute end mills: 1/8”, 3/16”, 1/4”, 5/16”, 3/8”, 1/2” •Comes with wooden organizer stand.

    3 Jaw Chuck & Adapter for Rotary tables

    For 6\" table order # 900-0095-004
    For 8\" table order # 900-0095-010

    4 Jaw Chuck & Adapter for Rotary tables

    For 6\" table order # 900-0095-021

    For 8\" table order # 900-0095-022

    6 PC HSS 4 Flute End Mill Set
    #999-6500-051

    • High Speed Steel • 3/8” shank • Includes six 4-flute end mills: 1/8”, 3/16”, 1/4”, 5/16”, 3/8”, 1/2” • Comes with wooden organizer stand.

    20 PC Titanium End Mill Set
    #999-6500-060

    • Titanium Coated for longer life • High Speed Steel &bull Center Cutting, Single End • Complete with wooden storage case • 10 pieces 2-flute: 3/16” - 3/4” by 16ths • 10 pieces 4-flute: 3/16” - 3/4” by 16ths

    6 PC R8 Milling Collet Set
    #999-6500-070

    Made of high grade steel and precision ground to close tolerance. Hardened. Internally thread: 7/16”-20. sizes: 1/8” to 3/4” by 8ths.

    R8 Quick Change Spindle Speed
    #999-6500-040

    MultiCAM Software
    #999-5004-013

    Part samples

    
    

    Note: Machines are built to order, contact us for current availability.

    Engineering Quality CNC Components andSystems Since 1985

    Kennesaw, GA 30144

    
    

    
    

    
    
    .
    

    ---